Bias Ply Repair Patches, 165*165mm, 5ply

January 13, 2021

Model NO.: BP-C1655
Trademark: HOPSON TYRE REPAIR
Origin: Ningbo, China
Model NO.: BP-C1655
Trademark: HOPSON TYRE REPAIR
Origin: Ningbo, China


Bias Ply Repair Patches, 165*165mm, 5ply

Don't miss the opportunity to check our full range of tire repair products. 

 

HOPSON TYRE REPAIR will always surprise you! 


1. Specially used for repairing bias tires of cars and trucks.
2. Can be used on tubeless or tube-type tyres.

HOPSON bias repair patches can be used on tubeless or tube-type tyres. They offer excellent flexibility, greater strength and construction and have been proven safe and dependable by millions of on-the-road miles. Manufactured with a ply of rubber between the fabric and cushion gum which acts as a float or shock absorbing ply. Repair unit construction allows for easy application and enables repairs to be made closer to the tyre bead, eliminating the need for a separate sidewall repair unit.


INSTRUCTIONS

1. Inspect tire for repairability using tire manufacturer or HOPSON LAB guidelines. If repairable, mark injury with crayon and carefully remove injuring object.

2. Probe injury to determine exact size and direction, removing all debirs.

3. Select the appropriate repair patch for injury and type of tyre. Apply prebuff cleaner to repair area and use rubber scraper toremove dirt and mold lubricants. Using Carbide Cutter, drill injury channel 3 times from inside then 3 times from outside, making sure all damaged and rusted cables have been removed and only good rubber remains.

4. Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire innerliner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to buffed area, working into rubber and ALLOW TO DRY THOROUGHLY.

5. Remove backing and center repair patch over injury and thoroughly stitch down from center out to remove trapped air.

6. Finish repair by applying Inner Liner Sealer around edge of repair patch the to overbuff area.
Part No. Size(mm) Description Box Qty Case Qty
BP-R601 60 1 Ply 25 24
BP-R751 75 1 Ply 20 24
BP-C902 90×90 2 Ply 10 12
BP-C1002 100×100 2 Ply 10 12
BP-C1304 130×130 4 Ply 10 12
BP-C1655 165×165 5 Ply 10 12
BP-C2407 240×240 7 Ply 5 12
 BP-C2957 295×295 7 Ply 5 12
BP-C3457 345×345 7 Ply 5 12
BP-C3909 390×390 9 Ply 5 12
BP-C4509 450×450 9 Ply 5 12


Bias Ply Repair Patches, 165*165mm, 5ply

Don't miss the opportunity to check our full range of tire repair products. 

 

HOPSON TYRE REPAIR will always surprise you! 


1. Specially used for repairing bias tires of cars and trucks.
2. Can be used on tubeless or tube-type tyres.

HOPSON bias repair patches can be used on tubeless or tube-type tyres. They offer excellent flexibility, greater strength and construction and have been proven safe and dependable by millions of on-the-road miles. Manufactured with a ply of rubber between the fabric and cushion gum which acts as a float or shock absorbing ply. Repair unit construction allows for easy application and enables repairs to be made closer to the tyre bead, eliminating the need for a separate sidewall repair unit.


INSTRUCTIONS

1. Inspect tire for repairability using tire manufacturer or HOPSON LAB guidelines. If repairable, mark injury with crayon and carefully remove injuring object.

2. Probe injury to determine exact size and direction, removing all debirs.

3. Select the appropriate repair patch for injury and type of tyre. Apply prebuff cleaner to repair area and use rubber scraper toremove dirt and mold lubricants. Using Carbide Cutter, drill injury channel 3 times from inside then 3 times from outside, making sure all damaged and rusted cables have been removed and only good rubber remains.

4. Cement the injury channel with Chemical Vulcanizing Cement and install the appropriate vulcanizing insert. Trim flush with the tire innerliner. Mechanically buff outlined repair area to a velvet-like texture. Remove buffing dust with a clean brush or vacuum. Apply Chemical Vulcanizing Cement to buffed area, working into rubber and ALLOW TO DRY THOROUGHLY.

5. Remove backing and center repair patch over injury and thoroughly stitch down from center out to remove trapped air.

6. Finish repair by applying Inner Liner Sealer around edge of repair patch the to overbuff area.
Part No. Size(mm) Description Box Qty Case Qty
BP-R601 60 1 Ply 25 24
BP-R751 75 1 Ply 20 24
BP-C902 90×90 2 Ply 10 12
BP-C1002 100×100 2 Ply 10 12
BP-C1304 130×130 4 Ply 10 12
BP-C1655 165×165 5 Ply 10 12
BP-C2407 240×240 7 Ply 5 12
 BP-C2957 295×295 7 Ply 5 12
BP-C3457 345×345 7 Ply 5 12
BP-C3909 390×390 9 Ply 5 12
BP-C4509 450×450 9 Ply 5 12

The hot and cold water dispenser is essential to people's daily life, the stainless steel thick film heater tubes and element can changing your way of drinking. There is no need to wait, which can make your life more convenient and quickly.  


thick film heating tube

GIDAPE® ANDETONG® series stainless steel thick film heating element. High Quality, Safety and Reliability, Stable Performance and Long service Life. Chinese are all around the world, so the Chinese culture and lifestyle are also affecting people all over the world. For example, drink hot and clean water is very healthy lifestyle. It can keep you digestion system health and improve circulation and detoxification. In finally, you need our environmental and safety thick film heating body which can heat water instantly.



Instant Heater For Water Purifier

Instant Heater For Water Purifier,Thick Film Water Heater ,Flowing Water Heater,Tankless Water Heater Filter

XINXIANG JIEDA PRECISION ELECTRONICS CO.,LTD , https://www.tubularheater.de