C120 High Quality Regenerative Side Channel Vacuum Pump

C120 high quality Regenerative side channel vacuum pump
Products Introduce

DACHENG MACHINERY offers a full range of multistage centrifugal blowers with 20 models to choose from. We have the right blower for your application today and our Research and Development department is developing new models to meet your needs tomorrow.

C120 multistage centrifugal blower:
Pressure:  -49 - 78.4 Kpa
Air capacity: 120 m³/min.

Dacheng manufactures blower and process control systems as well as provides complete blower packages with accessories to meet a wide variety of applications. 

Model and Technical Details

Advantage
1. Energy-efficient.
2. Non-bolt installation.
3. Customized high-speed efficient broadband motor.
4. Monitoring device.
5. Air cooling.
6. Long service life.
7. American Shell lubricant.
 
1- Energy-efficient:
Adopts American Gardner- Denver technology. The round speed of blower is 3600 rpm. The faster round speed, the greater centrifugal force, the higher efficiency, the lower power. In the same air capacity and pressure, the energy consumption of the multistage centrifugal blower is 15-25% lower than the roots blower.
2- Non-bolt installation:
Small tremors, the bearing vibration of the blower is <4mm/s. Our multistage centrifugal blower is one and only non- bolt installation blower in China.
3- Customized high-speed efficient broadband motor:
Motor frequency is 30-70Hz, round speed of motor is 4000 rpm. The bearing of the motor is Sweden SKF Bearing. The principal axis of the motor is ceramic plating to eliminate the magnetism.
4- Monitoring device:
The monitoring device is real-time monitoring the electricity, the voltage, round speed, vibration and temperature. When the temperature or vibration of the blower is over the setting range, the monitoring device will automatically power off to protect the blower.
5- Air cooling:
The bearing and oil box are on the both ends of the blower to isolate the heat of the rotors and there is the fan for cooling. The air cooling can be used in low temperature and reduce the use cost.
6- Long service life:
The blower cover is integrally casting with HT250 high grade cast iron. The impeller is casting with aluminum alloy. The bearing is using Swedish SKF bearing. The service life of multistage centrifugal blower is 10 years.
7- American Shell lubricant:
The multistage centrifugal blower is using American Shell lubricant. The lubricant can reduce the wear of the bearing and the service cost than lubricating grease.
 
Blower shell structure:

1. The blower shell is made of high quality cast iron. The pressure is changed by changing the number of the impellers.
2. There are different variety of options for inlet and outlet orientation design, according to the user's site to choose.
 
Rotor device

1. Impeller is casting by gravity, use steel mold, to ensure the accuracy of the impeller.
2. The single impeller is corrected by static balance, the rotor device being assembled is corrected by dynamic balance, to ensure smooth operation of the blower.
3. Each series of blowers are designed with a variety performance of impellers.
4. The balance plate is a utility model patented technology, it greatly reduces the axial force on the bearing, improve the efficiency of the blower and extended the bearing lift.
 
Complete blower

1. The whole structure of the blower has a patent for appearance.
2. The blower and the motor are fixed on the steel base. The whole blower can be placed on the cement hardened ground without the anchors, easy to install.  
 
Bearing device

1. Bearing device is fixed on the both ends of the blower, the temperature of the bearings is substantially reduced. And it is easy to routine maintenance.
2. Shaft seal is using labyrinth seal, carbon ring and suction seal. The suction seal is a utility model patents.  
 
Application

1. Municipal and industrial water treatment/sewage treatment biochemical aeration
2. Steel, chemical, carbon black industry high pressure air supply
3. Desulfurization System
4. Zinc plating technique
5. Mine flotation
6. Process gas supply
7. Landfill gas extraction
8. Pneumatic transmission
9. Vacuum Pumping Application
 
Package:
Bubble film or in accordance with customer requirements
 
Certificate:
ISO9001 and CE certificate

FAQ
1. What's the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Purpose
D: Use environment(Temperature, atmospheric pressure)
Or other specials you give us will be more appreciated. 
2. How long is your warranty?
Our warranty is 12 months after received the multistage centrifugal blowers. 
3. How long is the service life of multistage centrifugal blowers?
About 10 years under common use.
4. What is your terms of packing?
A: Generally, we pack our goods in bubble film. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.
5. How does your factory control product quality? 
We have quality inspection department. Before sending out product, we check each product. If there is quality problem, we will produce new one.
6.What are your terms of payment?
1. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
2. 100% IRREVOCABLE L/C AT STGHT.

Contact Us
Shandong Dacheng Machinery Technology Co., LTD
Address: Zhangqiu Mingshui, Jinan City, Shandong province, China 250200.
Website: http://www.chinadicheng.com
Tel: +86 0531-83216898
Fax: +86 0531-83216898
Cellphone: +86 013188890202 

C120 high quality Regenerative side channel vacuum pump
Products Introduce

DACHENG MACHINERY offers a full range of multistage centrifugal blowers with 20 models to choose from. We have the right blower for your application today and our Research and Development department is developing new models to meet your needs tomorrow.

C120 multistage centrifugal blower:
Pressure:  -49 - 78.4 Kpa
Air capacity: 120 m³/min.

Dacheng manufactures blower and process control systems as well as provides complete blower packages with accessories to meet a wide variety of applications. 

Model and Technical Details

Advantage
1. Energy-efficient.
2. Non-bolt installation.
3. Customized high-speed efficient broadband motor.
4. Monitoring device.
5. Air cooling.
6. Long service life.
7. American Shell lubricant.
 
1- Energy-efficient:
Adopts American Gardner- Denver technology. The round speed of blower is 3600 rpm. The faster round speed, the greater centrifugal force, the higher efficiency, the lower power. In the same air capacity and pressure, the energy consumption of the multistage centrifugal blower is 15-25% lower than the roots blower.
2- Non-bolt installation:
Small tremors, the bearing vibration of the blower is <4mm/s. Our multistage centrifugal blower is one and only non- bolt installation blower in China.
3- Customized high-speed efficient broadband motor:
Motor frequency is 30-70Hz, round speed of motor is 4000 rpm. The bearing of the motor is Sweden SKF Bearing. The principal axis of the motor is ceramic plating to eliminate the magnetism.
4- Monitoring device:
The monitoring device is real-time monitoring the electricity, the voltage, round speed, vibration and temperature. When the temperature or vibration of the blower is over the setting range, the monitoring device will automatically power off to protect the blower.
5- Air cooling:
The bearing and oil box are on the both ends of the blower to isolate the heat of the rotors and there is the fan for cooling. The air cooling can be used in low temperature and reduce the use cost.
6- Long service life:
The blower cover is integrally casting with HT250 high grade cast iron. The impeller is casting with aluminum alloy. The bearing is using Swedish SKF bearing. The service life of multistage centrifugal blower is 10 years.
7- American Shell lubricant:
The multistage centrifugal blower is using American Shell lubricant. The lubricant can reduce the wear of the bearing and the service cost than lubricating grease.
 
Blower shell structure:

1. The blower shell is made of high quality cast iron. The pressure is changed by changing the number of the impellers.
2. There are different variety of options for inlet and outlet orientation design, according to the user's site to choose.
 
Rotor device

1. Impeller is casting by gravity, use steel mold, to ensure the accuracy of the impeller.
2. The single impeller is corrected by static balance, the rotor device being assembled is corrected by dynamic balance, to ensure smooth operation of the blower.
3. Each series of blowers are designed with a variety performance of impellers.
4. The balance plate is a utility model patented technology, it greatly reduces the axial force on the bearing, improve the efficiency of the blower and extended the bearing lift.
 
Complete blower

1. The whole structure of the blower has a patent for appearance.
2. The blower and the motor are fixed on the steel base. The whole blower can be placed on the cement hardened ground without the anchors, easy to install.  
 
Bearing device

1. Bearing device is fixed on the both ends of the blower, the temperature of the bearings is substantially reduced. And it is easy to routine maintenance.
2. Shaft seal is using labyrinth seal, carbon ring and suction seal. The suction seal is a utility model patents.  
 
Application

1. Municipal and industrial water treatment/sewage treatment biochemical aeration
2. Steel, chemical, carbon black industry high pressure air supply
3. Desulfurization System
4. Zinc plating technique
5. Mine flotation
6. Process gas supply
7. Landfill gas extraction
8. Pneumatic transmission
9. Vacuum Pumping Application
 
Package:
Bubble film or in accordance with customer requirements
 
Certificate:
ISO9001 and CE certificate

FAQ
1. What's the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Purpose
D: Use environment(Temperature, atmospheric pressure)
Or other specials you give us will be more appreciated. 
2. How long is your warranty?
Our warranty is 12 months after received the multistage centrifugal blowers. 
3. How long is the service life of multistage centrifugal blowers?
About 10 years under common use.
4. What is your terms of packing?
A: Generally, we pack our goods in bubble film. If you have legally registered patent, 
we can pack the goods in your branded boxes after getting your authorization letters.
5. How does your factory control product quality? 
We have quality inspection department. Before sending out product, we check each product. If there is quality problem, we will produce new one.
6.What are your terms of payment?
1. TT 40% AS THE ADVANCE PAYMENT AND TT 60% AFTER INSPECTION BEFORE SHIPPING.
2. 100% IRREVOCABLE L/C AT STGHT.

Contact Us
Shandong Dacheng Machinery Technology Co., LTD
Address: Zhangqiu Mingshui, Jinan City, Shandong province, China 250200.
Website: http://www.chinadicheng.com
Tel: +86 0531-83216898
Fax: +86 0531-83216898
Cellphone: +86 013188890202 

LINA Extrusion Pelletizer

Most of the polymer must be kneaded and then granulated before it is made into a final product. Sorted by pelletizing ways, LINA rubber & plastic granulator can be divided into four categories: 1. Hot-cutting and air-cooling pelletizing method. 2. Under-water granulating method. 3. Water-strand extrusion method. 4. Water-ring granulation method. LINA pelletizer can meet the granulation needs of high-viscosity and low viscosity rubber and plastic materials, as well as some new materials and chemical additives.

LINA Water Strand Pelletizing Machine

LINA's water strand granulating machine adopts twin-screw extruder barrel and modular screw design. According to the processed materials and formula requirements, configurations such as length and diameter ratio, barrel structure, screw arrangement, filter change structure, number and location of exhaust, feeding methods, electrical control can be optimized. LINA rubber and plastic water strand granulator is suitable for kinds of renewable materials, outlet materials, glass fiber, nylon, ABS, high concentrated masterbatch and so on. LINA water pull pelletizer line is currently using the latest technology, its cooling effect is excellent, its pelletizing system is independent, and the outcome particles are even and beautiful.

Advantage of LINA Pelletizing Line

1. The unit has the whole unit process chain, sound and light failure alarm and fast lock fault point and other control functions. All parts that are in contact with the material are made of stainless steel.

2. High accuracy of temperature control system to ensure the temperature sensitivity of the material.

3. It adopts the drop type separating method after cutting process, to avoid Particle agglomeration and ensure particle cooling.

4. Feeding system of the pressing machine adopts heater and reversing device to solve problem of power outage, material crash and cleaning.

5. Especially, the barrel and die head adopts advanced foreign techniques to ensure and control the dangerous occurred when the pressure is uncontrollable. The honeycomb filter plate is easy to clean and quickly change the mesh and the die head t easy to leak.

6. The hoist adopts automatic return technology to ensure the working efficiency.

7. The technological combination of dual-pull forced feeder and single screw not only meet the high requirement of secondary continuous mixing, but also solve the problem of time and power consuming of traditional working process.

Specifications of LINA Extrusion Granulating Line

Water Strand Extrusion Pelletizer

water cooling strand extruder pelletizer, single screw exturder pelletizing line, single screw pelletizing line, plastic water strand extrusion pelletizer, double screw extruder with water cooling strand

LINA Machinery Industrial Co.,Ltd , http://www.linakneader.com