Corrugation 76mm X 25mm Steel Hot Rolling Machine

July 04, 2020

Model NO.: BOSJ-S
Customized: Customized
Advantage: Easy to Maintenance
Condition: New
Usage: Multifunctional
Material of Roller: Gcr 15
Control System: PLC Control System
Processing Methods: Heat Treatment
Trademark: BOSJ
Transport Package: Wooden Cases
Origin: Jiangsu China
HS Code: 8455212000
WHY NOT PIPE CULVERT?
POPULAR OPINION DOESN'T MAKE IT RIGHT.
There is a popular school of thinking surrounding the question of round shelters vs square shelters.  There is no shortage of people and even "professionals" that will claim that a round shelter offers more strength than a square shelters. This couldn't be further from the truth.  It's easy to trace the origins of this pop-culture thinking back to the Roman arch style of  engineering.  At the time - this style of architecture was cutting edge and far stronger than anything else.  However; just as time has progressed bringing new ideas and technology; so in like fashion has our understanding of engineering grown.  Round is NOT stronger than everything else. 
Working craft

Manual feeding----roll forming---Output
Operation area:20X 5.0 X 8(length X width X height)m
The direction of feeding: from left to right
 Power: 380V, 50Hz, 3 parch
Total Power:about 110k

 Main technical dat

Width of material sheet:1145 mm
Thickness of material sheet:0.9-3.0mm
Low carbon steel,galvanized sheet,cold steel,etc
Working piece length:≤6000 mm     

This roll forming machine can produce the forming part of corrugated steel.
Product:Corrugated steel
General structure of equipment
Roll Forming Machine
Structure
 Cast steel+gearbox driven
Functions and Structure

After 20 roller stations,the profile is finished.It consists of DC motor,reducer motor,driven gearbox and rollers.Lathee Bed and drive box adopts welded structure and stress treatment; Gear takes 45 steel hard tooth surface.
Working piece length:≤6000 mm     

This roll forming machine can produce the forming part of corrugated steel.
Product:Corrugated steel
General structure of equipment
Roll Forming Machine
Structure
 Cast steel+gearbox driven
Functions and Structure

After 20 roller stations,the profile is finished.It consists of DC motor,reducer motor,driven gearbox and rollers.Lathee Bed and drive box adopts welded structure and stress treatment; Gear takes 45 steel hard tooth surface.
The roller uses the combinated structure, the speed difference and the forming resistance are small, the steel plate surface will be less wear; and also guaranteed the precision shape of the working piece with no scratch .The material of the roller is the GCr15 forging, after whole quenching then by numerical control processing, degree of hardness can reach HRC58-62; Has the characteristic with high strength, hardness, precision and long service life etc.
Driven type:it takes gearbox driven

Main technical parameters
NO. Items Unit Parameters Remarks
 
1		 Material Type   Low carbon steel,Galvanized steel,etc  
Tensile strength Map ≥450  
Thickness mm 1.2~4.2  
2 Specification mm        See pic.  
3 Production speed m/min 4  
4 Roller material   GCr15 Quenching treatment  
5 Drive type   Gearbox  
6 Motor power kw About 152  
7 Electric control system   PLC frequenvy motor  
8 Dimension(Length*Width*Height) m 40X5X3.9  
Forming station: about 20stations
   Power of motor: 55X2=110kw frequency motor

Roller axis:¢280mm
Max feeding width:1145mm
Forming mould: one set
Full line is controlled by PLC control system with touch screen operation to achieve the human and PLC interactive. The operator can monitor the setting program (programmable control) and modify the parameter to control the line. Also can check the running status, parameter and error indication etc..

  Operation type: manual /auto two type switch. In manual position: can run the each part of the machine. In auto position: can run the full line. The emergency stop ensures the safe of the equipment and operator.
 

Bearing housings are modular assemblies designed to make it easy to install bearings and shafts, while protecting bearings, extending their operating life and simplifying maintenance.

Housings are available in many sizes, and generally fall into five standard categories: split plummer (or pillow) block housings, non-split plummer block housings, flanged housings, take-up housings and two-bearing housings. These products can be designed to meet specific duty requirements such as load, speed and operating environmental conditions.

Non-standard Bearing Housing designs can also be supplied to particular customer requirements: for example, where special shaft centre heights, unusual sealing arrangements or non-standard materials of construction may be specified.

If ease of installation and maintenance are prime considerations, then split plummer block housings are an excellent choice as they not only accommodate pre-assembled shafts, but also simplify bearing inspections and maintenance as the shaft does not need to be disassembled. These units are designed for self-aligning ball bearings, spherical roller bearings and CARB toroidal roller bearings. Non-split plummer block housings are preferred when there are heavy loads acting in a direction other than toward the support surface. They are also used when the housing has to be mounted from the end of the shaft.

We have specialized in producing US/EURO standard bearing housings more than 10 years, could help to design the bearing housing or produce the bearing housing according to your requirements. (OEM accepted)

Any questions, please feel free to contact with us!

If you are interested with our services or products, you are welcome to visit our factory at any time.

Bearing Housing

Bearing Housing,Roller Bearing Housing,Plummer Block Bearing Housing,Steel Bearing Housing

SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com