High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck

December 16, 2018

Model NO.: CLW5110GQW4
Drive Wheel: 4*2
Hoesrpower: 140HP
Condition: New
Water Tank: 3m3
Sewage Tank: 3.5m3
Tank Shape: Round
Unloading Method: Dump
Pump Speed: 500r/mm
Suction Speed: 45L/s
Max Vacuum: -0.08MPa
Suction Depth: Min 9m
Pump Flow Rate: 120m3/H
Trademark: CLW
Transport Package: Nude
Specification: 7000L
Origin: Cn
HS Code: 8705909090
Model NO.: CLW5110GQW4
Drive Wheel: 4*2
Hoesrpower: 140HP
Condition: New
Water Tank: 3m3
Sewage Tank: 3.5m3
Tank Shape: Round
Unloading Method: Dump
Pump Speed: 500r/mm
Suction Speed: 45L/S
Max Vacuum: -0.08MPa
Suction Depth: Min 9m
Pump Flow Rate: 120m3/H
Trademark: CLW
Transport Package: Nude
Specification: 7000L
Origin: Cn
HS Code: 8705909090
>>Part I: Truck specification

this truck can suck the mud, sewage, dejection and the dirty water with small stone under by vacuum pump. Vacuum pump is drived by PTO, to self-suck and self-discharge by four-way valve.

Truck can be fixed with chinese brand pump or Italy pump based on our requirements.

High pressure flushing 5000L sewage suction tank vacuum truck specification:
 
ITEM UNIT PARAMETER
Vehicle   Sewage clean and suction truck
Overall dimensions mm 6900*2120*2900
Water tank volume M3 3
Suction tank volume M3 3.5
GVW kg Appro×11495
Curb weight Appro×6310
Payload Appro×5000
Wheel base mm 3800
Approach/departure angle ° 24/10
Max speed km/h 90
Axle Load kg 2400/4800
Drive system 4x2 Emission standard Eu 3
Tire specification 8.25-16 Number of axles 2
Engine model Manufacturer Dongfeng Cummins Diesel Co.,Ltd
/ B140-33
Emission/kw 5900ml/105kw, 140hp
type Diesel, 6 cylinder , direct-line, turbocharge and water cooling
Standard Configuration Washing water tank(m3) 3
water pressure(mpa) ≥16
working length(m) ≥120
Winch tensile force(kn) ≥10
working length(m) ≥120
Suction suction tank(m3) 3.5
max vaccum (mpa) -0.08
suction depth(m) ≥9
storage tank dump angle 45
  Nozzle Hole clamp Angle 15°,25°
    Propulsive force ≥180 N
High-pressure pump HPP ELS122/160  Peformance 160bar 125 l/min
Inner DN(φ) 19 flow rate(m3/h) 120
Vertical suction(m) 9-10 Max vacuum 98%
Spare parts
  1. Tank window with Gauge.
  2. Spary gun, 10 different spary nozzles,hosepipe(¢19 PVC laminated steel tube),7 m suction pipe ¢108 , 10 m water filler hose DN 50.
  3. Vacuum pump, water oil separator, overflow valve. 
  4. With hydraulic pressure dump function, air cylinder open rear, high pressure clean system.


Photo of High pressure flushing 5000L sewage suction tank vacuum truck:

High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck
High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck






High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck


>>Part II:Company Introduction
1, ChengLi Special Automobile Co.,Ltd, which was appointed by the Development and Reform Committee of China, is the biggest special purpose vehicle manufacturer in China.also we are famous manufacturer producing all kinds of special trucks for municipal & environmental construction, virescence, petrol & medicals, container, and semi-trailer. Brands registered include CLW.Our company has independent export right and has a mount of clients in overseas. Our leading varieties include more than 100 types of trucks and related products such as water truck, fecal suction truck, garbage truck, refuse compactor, sewage suction truck, fuel tank, high-altitude operation truck, truck with crane, dump truck, instructional truck, van truck, semi-trailer, fire engine, refrigerator truck, water wagon, tractor, high-altitude water truck, bulk cement truck, chemical liquid truck, concrete mixer truck, and others. 
 
2.Our company has solid technology, flawless inspection, advanced equipment, reliable quality and flexible modes of operation. What's more, our company has roundly passed ISO9001:2000 and CCC (China Compulsory Certification) certifications. Series trucks of Cheng Li have procured remarkable achievements interiorly, especially from the investment in South Suburb Cheng Li Automobile Industry Park.
 We have been in this field for over 10 years, we have more than 300 types  of special trucks, our workers are more than 1000 and factory is more than 690,000m2 .We have successfully exported our trucks to Ghana, Sudan, Nigeria, Tajikistan, Namibia, Burma, Korea, Iran, Iraq, Vietnam etc. many Africa & Asia countries more than 4000 trucks every year. 

3.Quality control:our company truck pass ISO,3C,BV certification.
our factory have the quality Quality Inspection Department.before sending truck for facotry ,our quality inspection department will check the truck carefully.

4.Design capacity :Our factory have 30 technician and designer.

5. Exhibition:our factory attend the Guangzhou Trade Fair each year.

6. Export market: Africa,Asia,South America,Pacific and so on

7.Our company cooperate with famous chasis manufacturers,such as DONGFENG,FAW,SHINOTRUK,IVECO,FOTON,SHACMAN ,JAC , JMC ,KARRY,CHANGAN, HONGYAN , ISUZU, HINO ,NORTHBENZ , and etc.

8.Factory Show:
High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck

>>Part III:Certificate 

High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck

>>Part IV:Shipment 
High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck
>>Part V:FAQ
 

Q1. Your service
A:Our services
1. we can send our technician to arrive the customer's country to provide the service and also we can train customer's workers for free.
2. free consultation forever. When you meet small problems, professional advices can help you to solve them soon.
3. One year free cost warranty.
4. Spare parts forever. When you need spare parts, we can send them to you immediately.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

  LC terms is also can be accepted .

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.DAP etc .

Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

For standard products, delivery time is as below:

Water tanker truck:7 days
Fuel tanker trailer:15-20days
Garbage truck:15 days
Sweeper road truck:25 days
Wecker truck:7-10 days
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:20 days
Concrete mixer truck:7-25 days
LPG :20-30 days
LED truck:7-15 days
(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. How to control truck quality?
A: we have Rich experience workers and engineer to control quality before and on production , we strictly followed STATE special truck technical specification and safety production specification .

We have been in this line for over 15 years, dealing with all kinds of special trucks and trailers.


Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery


Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.

Q9. Did you sell truck to our country before?

A:Our main market is Africa, Asia, South America , Oceania ,middle east , annual sales is around 5000units and keeping growing every year .

Q10,If you have no certificate for exporting trucks to our country , what should we do?

A:There are some regions and countries we can not export completed truck but we can make body according to your requirements and send to you , you install it on your own chassis and sell completed truck .this can help you to save cost and  increase competitiveness

>>Part I: Truck specification

this truck can suck the mud, sewage, dejection and the dirty water with small stone under by vacuum pump. Vacuum pump is drived by PTO, to self-suck and self-discharge by four-way valve.

Truck can be fixed with chinese brand pump or Italy pump based on our requirements.

High pressure flushing 5000L sewage suction tank vacuum truck specification:
 
ITEM UNIT PARAMETER
Vehicle   Sewage clean and suction truck
Overall dimensions mm 6900*2120*2900
Water tank volume M3 3
Suction tank volume M3 3.5
GVW kg Appro×11495
Curb weight Appro×6310
Payload Appro×5000
Wheel base mm 3800
Approach/departure angle ° 24/10
Max speed km/h 90
Axle Load kg 2400/4800
Drive system 4x2 Emission standard Eu 3
Tire specification 8.25-16 Number of axles 2
Engine model Manufacturer Dongfeng Cummins Diesel Co.,Ltd
/ B140-33
Emission/kw 5900ml/105kw, 140hp
type Diesel, 6 cylinder , direct-line, turbocharge and water cooling
Standard Configuration Washing water tank(m3) 3
water pressure(mpa) ≥16
working length(m) ≥120
Winch tensile force(kn) ≥10
working length(m) ≥120
Suction suction tank(m3) 3.5
max vaccum (mpa) -0.08
suction depth(m) ≥9
storage tank dump angle 45
  Nozzle Hole clamp Angle 15°,25°
    Propulsive force ≥180 N
High-pressure pump HPP ELS122/160  Peformance 160bar 125 l/min
Inner DN(φ) 19 flow rate(m3/h) 120
Vertical suction(m) 9-10 Max vacuum 98%
Spare parts
  1. Tank window with Gauge.
  2. Spary gun, 10 different spary nozzles,hosepipe(¢19 PVC laminated steel tube),7 m suction pipe ¢108 , 10 m water filler hose DN 50.
  3. Vacuum pump, water oil separator, overflow valve. 
  4. With hydraulic pressure dump function, air cylinder open rear, high pressure clean system.


Photo of High pressure flushing 5000L sewage suction tank vacuum truck:

High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck
High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck






High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck


>>Part II:Company Introduction
1, ChengLi Special Automobile Co.,Ltd, which was appointed by the Development and Reform Committee of China, is the biggest special purpose vehicle manufacturer in China.also we are famous manufacturer producing all kinds of special trucks for municipal & environmental construction, virescence, petrol & medicals, container, and semi-trailer. Brands registered include CLW.Our company has independent export right and has a mount of clients in overseas. Our leading varieties include more than 100 types of trucks and related products such as water truck, fecal suction truck, garbage truck, refuse compactor, sewage suction truck, fuel tank, high-altitude operation truck, truck with crane, dump truck, instructional truck, van truck, semi-trailer, fire engine, refrigerator truck, water wagon, tractor, high-altitude water truck, bulk cement truck, chemical liquid truck, concrete mixer truck, and others. 
 
2.Our company has solid technology, flawless inspection, advanced equipment, reliable quality and flexible modes of operation. What's more, our company has roundly passed ISO9001:2000 and CCC (China Compulsory Certification) certifications. Series trucks of Cheng Li have procured remarkable achievements interiorly, especially from the investment in South Suburb Cheng Li Automobile Industry Park.
 We have been in this field for over 10 years, we have more than 300 types  of special trucks, our workers are more than 1000 and factory is more than 690,000m2 .We have successfully exported our trucks to Ghana, Sudan, Nigeria, Tajikistan, Namibia, Burma, Korea, Iran, Iraq, Vietnam etc. many Africa & Asia countries more than 4000 trucks every year. 

3.Quality control:our company truck pass ISO,3C,BV certification.
our factory have the quality Quality Inspection Department.before sending truck for facotry ,our quality inspection department will check the truck carefully.

4.Design capacity :Our factory have 30 technician and designer.

5. Exhibition:our factory attend the Guangzhou Trade Fair each year.

6. Export market: Africa,Asia,South America,Pacific and so on

7.Our company cooperate with famous chasis manufacturers,such as DONGFENG,FAW,SHINOTRUK,IVECO,FOTON,SHACMAN ,JAC , JMC ,KARRY,CHANGAN, HONGYAN , ISUZU, HINO ,NORTHBENZ , and etc.

8.Factory Show:
High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck

>>Part III:Certificate 

High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck

>>Part IV:Shipment 
High Pressure Flushing 5000L Sewage Suction Tank Vacuum Truck
>>Part V:FAQ
 

Q1. Your service
A:Our services
1. we can send our technician to arrive the customer's country to provide the service and also we can train customer's workers for free.
2. free consultation forever. When you meet small problems, professional advices can help you to solve them soon.
3. One year free cost warranty.
4. Spare parts forever. When you need spare parts, we can send them to you immediately.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

  LC terms is also can be accepted .

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.DAP etc .

Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

For standard products, delivery time is as below:

Water tanker truck:7 days
Fuel tanker trailer:15-20days
Garbage truck:15 days
Sweeper road truck:25 days
Wecker truck:7-10 days
Suction sewage/Fecal truck:7-15 days
Crane truck:15 days
Refrigerator/Van truck:7-15 days
Dump truck:20 days
Concrete mixer truck:7-25 days
LPG :20-30 days
LED truck:7-15 days
(the above is left hand drive chassis ,if you need the right hand drive chassis ,delivery time is longer than Left hand drive truck,Detailed clauses are subject to contract .)

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. How to control truck quality?
A: we have Rich experience workers and engineer to control quality before and on production , we strictly followed STATE special truck technical specification and safety production specification .

We have been in this line for over 15 years, dealing with all kinds of special trucks and trailers.


Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery


Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.

Q9. Did you sell truck to our country before?

A:Our main market is Africa, Asia, South America , Oceania ,middle east , annual sales is around 5000units and keeping growing every year .

Q10,If you have no certificate for exporting trucks to our country , what should we do?

A:There are some regions and countries we can not export completed truck but we can make body according to your requirements and send to you , you install it on your own chassis and sell completed truck .this can help you to save cost and  increase competitiveness

Knife gate valve

Automatic Gate Valve,Slurry Gate Valve,Slurry Valve,Knife Type Valve

Zhongfang Valve Xichuan Manufacturing Co., Ltd. , http://www.twt-zj.com