Hot PP Sheet Production Line

Model NO.: SJ-120
Screw Channel Structure: Non Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized and Non-Computerized Are All Ok
Machine: PP Sheet Production Line
Material: PP
Sheet / Board Width: 500-2000mm
Sheet / Board Thickness: 0.25-25mm
Sheet / Board Application: Chemical Industry / Packing / Medicine and etc.
Machine Dimensions: 25m*2.5m*3m
Trademark: Zhongsu
Transport Package: Plastic Film or According to Customers′ Requiring
Specification: SJ-120
Origin: Qingdao, China
HS Code: 847720900
 PP Sheet  Production Line

 
1, Sheet Application

 
1)      Chemical industry
 
2)      Packing
 
3)      Medicine
 
4)      Food
 
5)      Stationery and etc.

 
2, Sheet width range

 
500-2000mm

 
3, Sheet thickness range

 
0.25-25mm

 
4, Production line configuration

 
1)      Electricity control cabinet
 
2)      Single screw extruder
 
3)      Mould
 
4)      Mesh changer
 
5)  Lamination unit
 
6)      Cooling bracket
 
7)      Side-trimming unit
 
8)      Hual-off unit
 
9)      Lamination unit
 
10)   Cutter
 
11)   Conveyor

 
5, Auxiliaty machine

 
Auxiliary machine are used for recycling , the pvc sheet which are from side-trimming
can be used again .

 
1)      Crusher
 
Application : crushing the PVC sheet into small pieces

 
2)      Mixer
 
Application : mixing all materials even .

 
3)      Air compressor
 
Application : providing air .

 
6, Production period

 
50 working days after prepayment

 
7, Payment terms

 
T/T ( pre-payment 30% , balance 70%)

 
8, Warranty period

 
1 year after machine's delivery .

 
9,After-sales services
 

1) Final commissioning and training at buyer's factory.
 
2) The seller will send 1 or 2 engineers to make the final commissioning and training. All the charges (round air ticket charge, food, lodging and other local charges) have to be borne by the buyer.
 
3) US $ 100 for each engineer per day out of China should be paid by buyer

4) Both parties will negotiated the time for the final inspection and training according to the conditions between both sides.

The Single Row Deep Groove Ball Bearing is the most representative structure of the rolling bearing, which is widely used. The raceway located in the inner ring and outer ring is slightly larger than the radius of the rolling ball. In addition to the radial load, it can also bear the axial load of two directions. Small friction torque, the most suitable for high speed rotation, low noise, low vibration use. Besides the way out, there is also a bearing with a steel cover, plus a rubber sealed bearing, or a ring with a retaining ring on the outer ring. Generally, the steel plate punching cage is usually used. The main application of the cage: steel plate stamping cage (wave, crown shape... Single column; S shape... Copper alloy or phenolic resin to cut the cage and synthetic resin forming cage.

danlie1

Main uses
Car: rear wheel, transmission, electrical equipment parts; electric: General Motors, household appliances. Other: instruments, internal combustion engines, construction machinery, railway vehicles, loading and unloading machinery, agricultural machinery, and various industrial machinery.
Single row Deep Groove Ball Bearing room with the most widely used type of bearing:
1. Basic design of open bearing
2. Seal bearing
3, ICOS oil sealed bearing unit
4, bearing with stop slot, belt or without stop ring
danlie2


Single Row Deep Groove Ball Bearing

Single Row Deep Groove Ball Bearing,Deep Groove Ball Bearing,Single Row Deep Groove Bearing,Single Row Grooved Ball Bearing

LUOYANG AUTO BEARING CO.,LTD , https://www.lyautobearing.com