Batch Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flow-chat of Batch Waste Plastic Pyrolysis Plant
Advantages of Batch Waste Plastic Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Plastic Pyrolysis Plant
NO.
ITEM
PROJECT
1
Equipment Model
XY-7
XY-8
2
Door Model
Full Open Door
Full Open Door
3
Suitable Raw Materials
Rubber/Plastic Products
Rubber/Plastic Products
4
Structure
Horizontal Type Revolves
Horizontal Type Revolves
5
Reactor Size
Φ2200*6000mm Φ2600*6600mm
Φ2200*6000mm Φ2600*6600mm
6
Capacity for One Batch
5-6Mt; 8-10Mt
5-6Mt; 8-10Mt
7
Oil Yield of Tires
40%-45%
40%-45%
8
Work Pressure
Normal Pressure
Normal Pressure
9
Reactor Rotation Speed
0.4R/M
0.4R/M
10
Fuels Choice
Coal, Wood
Coal, Wood, Gas, Oil
11
Power
18KW/H
18-25KW/H
12
Cooling Method
Water Cycling
Water Cycling
13
Type of Drive
External Annular Gear
External Annular Gear
14
Heating Method
Direct
Direct
15
Type of Installation
With Foundation
With Foundation/Integrated Base
16
Noise dB(A)
≦85
≦85
17
Operation Mode
Intermittent Operation
Intermittent Operation
18
Total Weight(MT)
25-40
25-40
19
Installation Space Required
30m*10m
30m*10m
20
Manpower
3~4/batch
3~4/batch
21
Shipment
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Batch Waste Plastic Pyrolysis Plant Batch Waste Plastic Pyrolysis Plant,Fuel From Plastic Waste,Plastic To Oil Machine Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobileÂ
wires, telecommunication wires, and other kinds of copper wires, in order to recoverÂ
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..
copper cable recycling machine Main Features:Â
1.  No water needed, just put cable wires into the plantÂ
2.  Turnkey and compact type, PLC controller,Â
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires
Raw Material Input:Â 
Final Copper&plastic granules output:
copper cable recycling machine Working Process:Â
copper cable recycling machineTechnical Parameters:Â
ModelÂ
Processing
capacity
Processed wire dia.
Total power
Voltage
DimensionÂ
WeightÂ
FC-400-1
80-120kg/h
0.3-20mm
11.92KW
customized
1.5*1.5*1.9m
750kg
FC-400
200-250kg/h
23.12KW
2.7*1.9*2.3m
1200kg
FC-600A
300-400kg/h
48.36KW
4*1.85*2.4m
3400kg
FC-600
300-400kg/h
52.36KW
4.3*1.95*2.4m
3400kg
FC-800
600-800kg/h
0.1-40mm
75.4KW
9.1*2.3*3.54m
8000kg
FC-1200
1000-1200kg/h
129.6KW
16*10*3m
12000kg
Different Models of copper cable recycling machine:Â 
Contact us freely for more detailed quotation.Â
Â
copper cable recycling machine General IntroductionÂ
This copper wire recycling machine is used for recycling scrap copper wires and cables, like automobileÂ
wires, telecommunication wires, and other kinds of copper wires, in order to recoverÂ
copper. This machine is consisted of Crusher, Crushed Material Channel, Vibrating
Separator, Air Blower, Dust Collector, and the Underbed, etc..
copper cable recycling machine Main Features:Â
1.  No water needed, just put cable wires into the plantÂ
2.  Turnkey and compact type, PLC controller,Â
only 1-2workers to operate, occupy small area
3.  Purity of copper granules much more than 99%
4. Applications: Communication cables, Civilian wires, filament wires, all single-branch wires
Raw Material Input:Â
Final Copper&plastic granules output:
copper cable recycling machine Working Process:Â
copper cable recycling machineTechnical Parameters:Â
ModelÂ
Processing
capacity
Processed wire dia.
Total power
Voltage
DimensionÂ
WeightÂ
FC-400-1
80-120kg/h
0.3-20mm
11.92KW
customized
1.5*1.5*1.9m
750kg
FC-400
200-250kg/h
23.12KW
2.7*1.9*2.3m
1200kg
FC-600A
300-400kg/h
48.36KW
4*1.85*2.4m
3400kg
FC-600
300-400kg/h
52.36KW
4.3*1.95*2.4m
3400kg
FC-800
600-800kg/h
0.1-40mm
75.4KW
9.1*2.3*3.54m
8000kg
FC-1200
1000-1200kg/h
129.6KW
16*10*3m
12000kg
Different Models of copper cable recycling machine:Â
Contact us freely for more detailed quotation.Â
Â
Industrial Use Electric Copper Cable Recycling Machinery
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
Model NO.: FC
Function: Scrap Copper Wire Recycling
Structure: Compact
Recycling Method: Dry Type
Applicable Wire: All Kinds of Copper/Aluminum Cable
Working Principle: Crushing&Separating
Processed Wire Diameter: 0.3-40mm
Voltage: Customized
Trademark: FORCHEN
Transport Package: Ply Wooden Case
Specification: weight: 800-12000kg
Origin: Henan, China
HS Code: 8479
copper cable recycling machine General Introduction 1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.