Laboratory Instruments Cosmetic Test Used High Altitude Chamber

November 02, 2020

Model NO.: YCTL-408
Control: Computer Control
Weight: 100-500Kg
Power Source: AC380V
Oil Cylinder Position: Under
Model: Testing Cosmetic Samples Lab Altitude Chamber
Inner Size(W*H*D): 600*850*800mm
Exterior Size(W*H*D): 1310*1850*1550mm
Temperature Range: Rt+10c ~ 300 C
Testing Temperature Range: -65c ~ +150c
Temp. Fluctuation: +/-0.5c
Temp. Accuracy: +/-2.0c
Heating up Time: < or =60min
Cooling Down Time: </=45min
Customization Servise: Yes
Trademark: Yuanyao
Transport Package: Plywooden Cartons
Specification: CE, ISO
Origin: Guangdong, China
HS Code: 9031200000
Model NO.: YCTL-408
Control: Computer Control
Weight: 100-500Kg
Power Source: AC380V
Oil Cylinder Position: Under
Model: Testing Cosmetic Samples Lab Altitude Chamber
Inner Size(W*H*D): 600*850*800mm
Exterior Size(W*H*D): 1310*1850*1550mm
Temperature Range: Rt+10c ~ 300 C
Testing Temperature Range: -65c ~ +150c
Temp. Fluctuation: +/-0.5c
Temp. Accuracy: +/-2.0c
Heating up Time: < or =60min
Cooling Down Time: </=45min
Customization Servise: Yes
Trademark: Yuanyao
Transport Package: Plywooden Cartons
Specification: CE, ISO
Origin: Guangdong, China
HS Code: 9031200000
Laboratory instruments cosmetic test used high altitude chamber


Application:


As we know, the purpose of your testing is to simulate environment inside the cargo flight when it carries

your cosmetic during transportation in high sky, 

from taking off, leaving ground till it enters stratosphere for long distance cruise after uniform climbing.

During this proceeding, what we need to look into are 2 factors: 

minimum cold temperature when it cruises in the stratosphere, 

and the temperature changing speed while it climbs up after taking off and finally reaches the height to 

keep stable flying. 

Due to limit of our professional knowledge in this particular field, we can't figure out how fast does the car

go flight climb up vertically per minute.

So we have no idea how fast does the temperature inside it change neither, however, as expert of science

research for such kind of testing, we are sure that you can find out these answers. If so, 

it would be much great and better for both of us to judge the possibility of the above mentioned proposal.


Detailed technical spec
 
Product model YCTL-408
Power 3 phase AC 380V 50Hz max, 6KW
Inner chamber size(W*H*D) 500*600*500mm
Exterior chamber size (W*H*D) 1210*1600*1250mm
Temperature range -70ºC ~ +155ºC
Temperature fluctuation ±0.2ºC(atmospheric pressure)
Indication resolution 0.01ºC
Temperature uniformity ±2ºC
Heat up time 3ºC/min
Pressure range 600mmHg to 1mmHg
Pressure accuracy ±0.1Kpa(</= 2Kpa); ±5%(2Kpa~40Kpa); ±2Kpa(>/=40Kpa)
Depressurization time to 1mmHg (25ºC ± 10ºC) 30min
Insulation Glass wool & PUF
Perspiration resistant K style tube
Chamber materials SUS#304 stainless steel for internal chamber, Galvanized steel with ivory white powder coated finish for exterior chamber.
Accessories 1. Temperature resistant silicone gasket * 1pcs
2. Cable port * 1pcs ¢100mm(50mm)
3. Window light * 1pcs
4. Multi pane vacuum glass window*1pcs


Refrigeration & heating system

1. Original imported high efficiency compressor.

2. Air cooling condenser

3. Fin-tube heater

4. Original imported solenoid valves

5. Inner spiral K-type refrigerant copper tube

6. U-type finned electro thermal tube

7. Heating & cooling systems separated

8. Refrigerating system


Circling & Drain system

1. Centrifugal fan & imported motor

2. Reverse uniflow (air flow direction)

3. Flow-throws wind

4. Drain system uses swirl type outlet and U-type deposition unit


Programable micro-computer LCD touch controller

1. Program-able micro-computer LCD touch controller, user-friendly, stable and easy use.

2. Programs: edit up to 32 PTNs (800 steps per pattern), each PTN can be executed 999 times.

3. PID & SSR control way, stable and easy to use.

4. Korea TIME 1500 controller


Yuanyao company profile:

Since 2004 we went into the environmental test chambers industry. In 2005 we eastablished our own

factory-Dongguan Yuanyao Electronics Technology Co., Ltd, which has become an important

manufacturer of environmental friendly test chambers.

Our main products include

Temperature humidity chambers

Thermal shock chambers

Walk-n stability chambers

LCM(LCD) aging chambers

Hot ovens

Vacuum ovens

Hot air clean dryers

Salt spray testers

Steam aging testers

Dust resistance chambers

Water test chambers

UV/Xenon aging test chambers

Glue dispensing machines

Ozone test machines

High altitude low pressure simulation test chambers

Air ventilation aging test chambers

Fast chamber rate cliamte chambers (ESS chamber)

Combined temp. humidity & vibration test chambers and so on...

If you have any query, please feel free to contact Ms Vickey Huang back,

we would be happy to servise you.

Thanks in advance !

Ms. Vickey Huang
  Laboratory instruments cosmetic test used high altitude chamber


Application:


As we know, the purpose of your testing is to simulate environment inside the cargo flight when it carries

your cosmetic during transportation in high sky, 

from taking off, leaving ground till it enters stratosphere for long distance cruise after uniform climbing.

During this proceeding, what we need to look into are 2 factors: 

minimum cold temperature when it cruises in the stratosphere, 

and the temperature changing speed while it climbs up after taking off and finally reaches the height to 

keep stable flying. 

Due to limit of our professional knowledge in this particular field, we can't figure out how fast does the car

go flight climb up vertically per minute.

So we have no idea how fast does the temperature inside it change neither, however, as expert of science

research for such kind of testing, we are sure that you can find out these answers. If so, 

it would be much great and better for both of us to judge the possibility of the above mentioned proposal.


Detailed technical spec
 
Product model YCTL-408
Power 3 phase AC 380V 50Hz max, 6KW
Inner chamber size(W*H*D) 500*600*500mm
Exterior chamber size (W*H*D) 1210*1600*1250mm
Temperature range -70ºC ~ +155ºC
Temperature fluctuation ±0.2ºC(atmospheric pressure)
Indication resolution 0.01ºC
Temperature uniformity ±2ºC
Heat up time 3ºC/min
Pressure range 600mmHg to 1mmHg
Pressure accuracy ±0.1Kpa(</= 2Kpa); ±5%(2Kpa~40Kpa); ±2Kpa(>/=40Kpa)
Depressurization time to 1mmHg (25ºC ± 10ºC) 30min
Insulation Glass wool & PUF
Perspiration resistant K style tube
Chamber materials SUS#304 stainless steel for internal chamber, Galvanized steel with ivory white powder coated finish for exterior chamber.
Accessories 1. Temperature resistant silicone gasket * 1pcs
2. Cable port * 1pcs ¢100mm(50mm)
3. Window light * 1pcs
4. Multi pane vacuum glass window*1pcs


Refrigeration & heating system

1. Original imported high efficiency compressor.

2. Air cooling condenser

3. Fin-tube heater

4. Original imported solenoid valves

5. Inner spiral K-type refrigerant copper tube

6. U-type finned electro thermal tube

7. Heating & cooling systems separated

8. Refrigerating system


Circling & Drain system

1. Centrifugal fan & imported motor

2. Reverse uniflow (air flow direction)

3. Flow-throws wind

4. Drain system uses swirl type outlet and U-type deposition unit


Programable micro-computer LCD touch controller

1. Program-able micro-computer LCD touch controller, user-friendly, stable and easy use.

2. Programs: edit up to 32 PTNs (800 steps per pattern), each PTN can be executed 999 times.

3. PID & SSR control way, stable and easy to use.

4. Korea TIME 1500 controller


Yuanyao company profile:

Since 2004 we went into the environmental test chambers industry. In 2005 we eastablished our own

factory-Dongguan Yuanyao Electronics Technology Co., Ltd, which has become an important

manufacturer of environmental friendly test chambers.

Our main products include

Temperature humidity chambers

Thermal shock chambers

Walk-n stability chambers

LCM(LCD) aging chambers

Hot ovens

Vacuum ovens

Hot air clean dryers

Salt spray testers

Steam aging testers

Dust resistance chambers

Water test chambers

UV/Xenon aging test chambers

Glue dispensing machines

Ozone test machines

High altitude low pressure simulation test chambers

Air ventilation aging test chambers

Fast chamber rate cliamte chambers (ESS chamber)

Combined temp. humidity & vibration test chambers and so on...

If you have any query, please feel free to contact Ms Vickey Huang back,

we would be happy to servise you.

Thanks in advance !

Ms. Vickey Huang
 

Description: Spray Dryer drying is the technology most widely used in the liquid technology shaping and in the drying industry. The drying technology is most suitable for producing solid powder or particle products from liquid materials, such as: solution, emulsion, suspension and pumpable paste states ,For this reason, when the particle size and distribution of the ­final products, residual water contents, mass density and the particle shape must meet the precise standard, spray dryer drying is one of the most desired technologies.   Work Principle: High Speed Centrifugal Spray Dryer Series of LPG is gas-liquid co-current flow drying equipment, using high-speed centrifugal atomizer, the liquid will be atomized into fine droplets, then mix with the hot air from the distributor in the dryer, heat and mass transfer exchanges rapidly during the mixing process. In a very short period of time the liquid become dry powdered products. Production control and product quality control is convenient and reliable. It is widely used in the drying production of different types of liquids materials.

Chemical Engineering Industry

Zeolite Drying,Zeolite Dryer Machine,Zeolite Dryer Equipment

Changzhou Ruide Drying Engineering Technology Co., Ltd , http://www.rddryer.com