Lock Accessories Factory Direct Sales of Stainless Steel Powder Metallurgy

August 17, 2018

Technics: MIM
Quoted Condition: 2D / 3D Drawing / Sample
Package: Carton, Plastic Bag, Export Package
OEM/ODM: Welcome
Production Time: 15-30 Days
Weight: 24.8g
Size: 102.5*10.4 mm
Trademark: drome
Transport Package: Carton
Specification: 290*190
Origin: Suzhou, China
MIM(Metal powder Injection Molding) isthe5th generation of metal forming technology.  Over 40 years of development, people gradually find more applications for MIM process especially in the 3C products application. From initial groping to mature stage, MIM technology witness the ups and downs of 3C products in the past ten years.
Fortunately, there are several parts of design such as hinges, fiber optic connector bases, and new style connectors are closely dependent on MIM technology. These products are being produced in a large number and MIM technology is being adopted by more and more.


MIM and CIM--Drome can provide one-stop service solution.
The basic attributes include:
1.Economical production of complex parts with weight from 0.03 to 200g from high-performance engineering materials.
2.Parts with high dimensional precision (±0.1%~±0.5%) and good surface quality (surface roughness 1~2μm).
3.Parts with high relative density (96%~100%), homogeneous microstructure and superior performance.
4.Adaptable to powders of various materials and wide application of the parts.
5.Material saving through the recycle of wastes, production process with high level of automation and suitable for mass production

Flow chart of metal injection molding

Lock Accessories Factory Direct Sales of Stainless Steel Powder Metallurgy


Application of MIM
Lock Accessories Factory Direct Sales of Stainless Steel Powder Metallurgy






Products Range:
 
Material   Typical Values    
Designation Code Density g/cm3 Tensile Properties Young's modulus, Gpa Un-notched Charpy Impact Energy,J Hardness,Rockwell
    UTS. Mpa Y.S. (0.2%), Mpa Elongation (in 25.4mm) %     Macro (apparent)  Micro (converted)
MIM-Fe2Ni 7.8 280 115 25     55 HRB 50HRC    
MIM-Fe8Ni 7.8 450   12     84HRB 50HRC    
MIM-2200 (as sintered) 7.8 290 125 40.0 190 135 45 HRB  
MIM-2700 (as sintered) 7.8 415 255 26.0 190 175 69 HRB  
MIM-4605 (as sintered) 7.8 440 205 15.0 200 70 62 HRB  
MIM-4605 (Q&T) 7.8 1655 1480 2.0 205 55 48 HRC 55 HRC
MIM-304L 7.8 500   70     60 HRB  
MIM-316L (as sintered) 7.85 520 175 50.0 190 190 67 HRB  
MIM-410 7.7 900   7       40 HRC
MIM-420 (heat treated) 7.7 1380 1200 12 190 40   45-60HRC
MIM-430L (as sintered) 7.8 410 240 25.0 210 150 65 HRB  
MIM-440C 7.8 700 590 15       45-60HRC
MIM-17-4PH (as sintered) 7.8 900 730 6.0 190 140 27 HRC  
MIM-17-4PH (heat treated) 7.8 1190 1090 6.0 190 140

Electric Discharge Machining (EDM) Introduce

Electrical discharge machining (EDM), sometimes colloquially also referred to as spark machining, spark eroding, burning, die sinking, wire burning or wire erosion, is a manufacturing process whereby a desired shape is obtained using electrical discharges (sparks).

There are three types EDM Machine : Wire Cut EDM Machine, Die EDM Sinker Machine, Small Hole Drilling EDM Machine.

The performance of modern EDM equipment is extremely high: high cutting speeds, highly efficient automation, interlinking and storage of very long and recurring machining cycles. And thanks to electronic monitoring and fully automated correction of the EDM process, no supervision is required.Electric Discharge Machining EDM introduce

CNC Wire Cut EDM Machine: 

In the case of wire-cut EDM, the metal is cut with a special metal wire electrode. The wire travels along a pre-programmed path. By differing movements of the upper and lower wire guides, angled or conical surfaces can be produced to the highest accuracy and with the finest surface finish.

Full closed loop technology, servo motor adopted, similar with Sodick and AgieCharmilles machine construction for molybdenum Wire Cut EDM to get much higher accuracy than traditional DK77 serious WEDM. The cutting roughness reach 0.7um and cutting accuracy reach +-0.0025mm. It make molybdenum wire cut EDM cutting finishing close to brass wire cut EDM as soon as possible especial automatically wire feeding will be launch to market very soon.

Wire Cut EDM Machine China supplier

CNC Wire Cut EDM Machine Applications

Wire EDM-manufactured parts are everywhere, touching every part of our lives. Starting a car, boarding an airplane or booting up a laptop are all possible thanks to electrical discharge machining.

Our EDM machines are capable of working on virtual all conductive materials

  • Stainless steel
  • Automotive
  • Copper
  • Carbide
  • Cobalt
  • Titanium
  • Brass
  • Inconel
  • Manganese
  • Cast iron
  • Hard tool steels
  • Zirconium
  • Zamac
  • Steel
  • Iron
  • Aluminum
  • Tungsten
  • Silver
  • Hastelloy
  • Molybdenum
  • Tantalum
  • Gold
  • Kovar
  • Chromium
  • Niobium         

30 years of experience  guarantee you to get the best result at the best price for all applications.Our products including  Wire Cutting , EDM Spark Machine , Sparking Edm Machine ,Electric Spark Machine.

Industries/Applications

  • Automotive
  • Aerospace
  • General machining
  • Medical and Dental
  • Construction
  • Die mold
  • Electronic components
  • Information and Commucations Technology

CNC Wire Cut EDM Machine

Wire Cutting Machine,Wire Cut EDM Machine,CNC Wire Cut Machine,Wire Erosion Machine,Wire Cutting,EDM Spark Machine,Sparking Edm Machine,Electric Spark Machine

Suzhou HanQi CNC Equipment Co.,Ltd , http://www.edm-machines.com