New Cross Flow Cooling Tower Infill

Model NO.: SHH cross flow cooling tower infill
Noise Level: Low
Application Fields: Industrial
Certification: ISO, CE, SGS
Condition: New
Corrugation Height: 20mm
Sheet Thickness: 0.25-0.45mm
Applicable Water Temperature: 50ºC ~ -35ºC
Trade Terms: Fob, CIF, CFR, DDU.
Minimum Order Quantity: 1000PCS
Trademark: NEWIN
Transport Package: 20/40/40hq Container with Loose Packing
Specification: CTI
Origin: China
HS Code: 84195000
Model NO.: SHH cross flow cooling tower infill
Noise Level: Low
Application Fields: Industrial
Certification: ISO, CE, SGS
Condition: New
Corrugation Height: 20mm
Sheet Thickness: 0.25-0.45mm
Applicable Water Temperature: 50ºC ~ -35ºC
Trade Terms: Fob, CIF, CFR, DDU.
Minimum Order Quantity: 1000PCS
Trademark: NEWIN
Transport Package: 20/40/40hq Container with Loose Packing
Specification: CTI
Origin: China
HS Code: 84195000
New Cross Flow Cooling Tower Infill 
for more details, welcome to visit our website: http://www.coolingtowerparts.cn/brand-new-cooling-tower-fills_p86.html

1) Features
light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc


New Cross Flow Cooling Tower Infill

2) Specification
 
Model-SHH PVC
Max.length 1270 mm
Width 950 mm
Normal size 950x(810+900)mm, 950x(910+1000)mm,950x950/1270
Continuous
operation tempperature
50ºC
Max.applicationtemp.
(short term)
60ºC
Color Grey ( customizable)
Corrugation height 20 mm
Installation method Hung or glued
Applicable water temperature: 50ºC ~ -35ºC
Applicant: Cross flow, Square Type, Modular Cell Cooling Tower

Packing and Loading:  LCL shipment: by plywood pallet/case/carton, FCL shipment: by container
Trade Terms: EXW, FOB, CFR,CIF, DDU.
Payment term: T/T, L/C, West Union
Minimum Order Quantity: 1000pcs


3) Drawing & pictures

New Cross Flow Cooling Tower Infill
 

New Cross Flow Cooling Tower Infill

New Cross Flow Cooling Tower Infill

New Cross Flow Cooling Tower Infill

Advantages of Newin Film Fill Media

1. Excellent performance, Film type high cooling efficiency fills media, corrugated shape make water surface is bigger. Packing in 2 ~ 5 layer, between layers there is a hot water redistributed process.

 

2.Good hydrophilicity, ventilation resistance small surface is rough and the smooth plane packing good hydrophilicity, water bibulous rate is less than 0.015%, make more form a thin film of water, but not splash down, the water and air are more fully contact with the water and air at the same time on the surface flow disturbance.Packing after assembly into the surface wind is a honeycomb diverter, have good uniform wind effect, improve the intensity of heat exchange and stabilize the moisture. 30 ° inclination at the wind inlet direction, effectively reduces the floating water loss. Set up in the end of the packing is according to the impact separation process design of water cleaner, making the drift loss controlled within one over one hundred thousand.

 

3.Shenzhen Newin Machinery Co., Ltd. produce knob core materials of the production of cooling tower made from high quality PVC PE sheet blister, mainly adopts the trapezoidal wave, wave, S wave type, herringbone corrugated packing, heat dissipation coefficient of large area of growth, water flow distribution on the surface performance is good, water and air flowing through the panel when the advantages of large disturbance.Packing is not easy to deformation, high temperature resistant, anti-aging, and flame retardant performance is good, small wind resistance coefficient.Easy installation, easy to clean, easy to transport the radiator filler used adhesive type and mounted, installation is simple, easy to clean, and successfully solves the adhesive packing deformation due to fouling, self-respect, and the scale is more serious, difficult to clean after deformation.Packing good flame retardant performance, flame retardant oxygen index up to 44.7.

 

4. Production of Shenzhen Newin Machinery Co., Ltd. Such as, wet cooling tower PVC packing main models are divided into: Round type counter flow cooling tower film fill media, square counter flow cooling tower film fill media, square type cross flow cooling tower film fill media, industrial cooling tower film fill media, closed cooling tower film fill media, evaporate cooling tower film fill media, central air conditioning cooling tower cooling film fill media, PVC sheet, main appearance size is 500 * 650 mm, 500 * 750 mm, 750 * 850 mm, 500 * 850 mm, 500 * 1050 mm, 1050 * 1080 mm, 600 * 1080 mm, 750 * 800 mm, 800 * 400 mm, 1000 * 400 mm, 305 * 1220 mm, 1220 * 1220 mm, 915 * 1220 mm, 1220 * 1220 mm, 1220 * 1000 mm, 915 * 1000 mm, 1000 * 2880 mm, 2880 * 2880 mm, 1000 * 2880 mm, 1330 * 2450 mm ect., The distance between piece and piece is 12-35 mm, sheet thickness of 0.25 ~ 0.25 (+ / - 0.03 mm), quality is about 15 kg per cubic meter of assembly body to 30 kg/m3, the assembly height of 0.6 m - 0.6 m, staggered, for special-shaped pieces of visual field surrounding the tower wall arrangement, cutting and installation according to the actual size.




Contact

Ms. Sue Huang

Mobile: +86 15013649911
  


  
SHENZHEN  NEWIN  MACHINERY CO., LTD. 
Trading Plaza No.5, China South City, Pinghu Street,
Longgang District, 
Shenzhen, China, 518100
Tel: +86 755 2307 7266        
Web: www.newincoolingtower.com  | www.coolingtowerparts.cn 
New Cross Flow Cooling Tower Infill New Cross Flow Cooling Tower Infill 
for more details, welcome to visit our website: http://www.coolingtowerparts.cn/brand-new-cooling-tower-fills_p86.html

1) Features
light weight, strength, good flame retardant performance, corrosion resistance, advanced design, ventilation resistance is small, strong hydrophilicity, large contact area, etc


New Cross Flow Cooling Tower Infill

2) Specification
 
Model-SHH PVC
Max.length 1270 mm
Width 950 mm
Normal size 950x(810+900)mm, 950x(910+1000)mm,950x950/1270
Continuous
operation tempperature
50ºC
Max.applicationtemp.
(short term)
60ºC
Color Grey ( customizable)
Corrugation height 20 mm
Installation method Hung or glued
Applicable water temperature: 50ºC ~ -35ºC
Applicant: Cross flow, Square Type, Modular Cell Cooling Tower

Packing and Loading:  LCL shipment: by plywood pallet/case/carton, FCL shipment: by container
Trade Terms: EXW, FOB, CFR,CIF, DDU.
Payment term: T/T, L/C, West Union
Minimum Order Quantity: 1000pcs


3) Drawing & pictures

New Cross Flow Cooling Tower Infill
 

New Cross Flow Cooling Tower Infill

New Cross Flow Cooling Tower Infill

New Cross Flow Cooling Tower Infill

Advantages of Newin Film Fill Media

1. Excellent performance, Film type high cooling efficiency fills media, corrugated shape make water surface is bigger. Packing in 2 ~ 5 layer, between layers there is a hot water redistributed process.

 

2.Good hydrophilicity, ventilation resistance small surface is rough and the smooth plane packing good hydrophilicity, water bibulous rate is less than 0.015%, make more form a thin film of water, but not splash down, the water and air are more fully contact with the water and air at the same time on the surface flow disturbance.Packing after assembly into the surface wind is a honeycomb diverter, have good uniform wind effect, improve the intensity of heat exchange and stabilize the moisture. 30 ° inclination at the wind inlet direction, effectively reduces the floating water loss. Set up in the end of the packing is according to the impact separation process design of water cleaner, making the drift loss controlled within one over one hundred thousand.

 

3.Shenzhen Newin Machinery Co., Ltd. produce knob core materials of the production of cooling tower made from high quality PVC PE sheet blister, mainly adopts the trapezoidal wave, wave, S wave type, herringbone corrugated packing, heat dissipation coefficient of large area of growth, water flow distribution on the surface performance is good, water and air flowing through the panel when the advantages of large disturbance.Packing is not easy to deformation, high temperature resistant, anti-aging, and flame retardant performance is good, small wind resistance coefficient.Easy installation, easy to clean, easy to transport the radiator filler used adhesive type and mounted, installation is simple, easy to clean, and successfully solves the adhesive packing deformation due to fouling, self-respect, and the scale is more serious, difficult to clean after deformation.Packing good flame retardant performance, flame retardant oxygen index up to 44.7.

 

4. Production of Shenzhen Newin Machinery Co., Ltd. Such as, wet cooling tower PVC packing main models are divided into: Round type counter flow cooling tower film fill media, square counter flow cooling tower film fill media, square type cross flow cooling tower film fill media, industrial cooling tower film fill media, closed cooling tower film fill media, evaporate cooling tower film fill media, central air conditioning cooling tower cooling film fill media, PVC sheet, main appearance size is 500 * 650 mm, 500 * 750 mm, 750 * 850 mm, 500 * 850 mm, 500 * 1050 mm, 1050 * 1080 mm, 600 * 1080 mm, 750 * 800 mm, 800 * 400 mm, 1000 * 400 mm, 305 * 1220 mm, 1220 * 1220 mm, 915 * 1220 mm, 1220 * 1220 mm, 1220 * 1000 mm, 915 * 1000 mm, 1000 * 2880 mm, 2880 * 2880 mm, 1000 * 2880 mm, 1330 * 2450 mm ect., The distance between piece and piece is 12-35 mm, sheet thickness of 0.25 ~ 0.25 (+ / - 0.03 mm), quality is about 15 kg per cubic meter of assembly body to 30 kg/m3, the assembly height of 0.6 m - 0.6 m, staggered, for special-shaped pieces of visual field surrounding the tower wall arrangement, cutting and installation according to the actual size.




Contact

Ms. Sue Huang

Mobile: +86 15013649911
  


  
SHENZHEN  NEWIN  MACHINERY CO., LTD. 
Trading Plaza No.5, China South City, Pinghu Street,
Longgang District, 
Shenzhen, China, 518100
Tel: +86 755 2307 7266        
Web: www.newincoolingtower.com  | www.coolingtowerparts.cn 
New Cross Flow Cooling Tower Infill

Someone may not clear that it would change the time, resulting in poor engine performance even damage to valves, if the teeth on the belt jump over the teeth of gear. So that`s why Tensioner Bearing exists. It keeps belt tension never be too low or too high.

The tensioner Bearing should be replaced when replacing the timing belt. And we are professional for the United States, Europe, Japan and other countries, to provide high quality and affordable tension bearing.

belt Idler Pulleys are provided with a series of radial reinforcing ribs to prevent deformation caused by the wedging action of the belt. 

The Timing Belt Tensioner is used to keep tension on the timing belt. The timing belt is a rubber belt that runs over and through a series of pulleys and gears. Over time, due to age and heat, the belt will stretch out. As the belt stretches it can become loose, so the tensioner needs to adjust the belt as needed to keep it tight. 


Tensioner Bearing

Tensioner Bearing,High Strength Tensioner Bearing,Tensioner Roller Bearing,Belt Idler Pulley,Timing Belt Tensioner

NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com