Nylon Fishing Net Monofilament Production Line

May 20, 2020

  • Model NO.: SJ-65 SJ-80
  • Mode: Horizontal
  • Raw Material: PP PE Nylon
  • Computerized: Non-Computerized
  • Warranty: 12months
  • Output: 60-100kg/H
  • Transport Package: Suitable for Sea Shipment
  • Origin: Qingdao, China
  • Type: Round Wire Drawing Machine
  • Product Types: Broom, Brush, Zipper, Construction Fence
  • Automation: Automatic
  • Machine Length: 35m
  • Weight: 13t
  • Trademark: Jinfuxin
  • Specification: CE ISO SGS
  • HS Code: 84772090
PA Nylon PP PE Monofilament Production Line
Description
With PA Nylon PP PE material, to produce various specifications of monofilament. It consists of drying system, extruder, filter, melt pump, mould, haul-off, oven and winder, etc.
 
Why choose us:
1. High quality final monofilament, high strength, good elasticity and shining
2. Italy design type packing, cutting and winding
3. We major in Plastic Monofilament Production Line for 15 years
4. Always have at least 3 sets of sample machine in our workshop
5. Can take customers to see the running machines
6. Can test the machine for customers
 
Introduction
Power supply 380V,3 phase,50HZ
Raw material PP/ PE/ PA/ Nylon
Diameter of final product 0.05-2.5mm
Capacity 40-250kg/hour
Manpower 2-4 persons/shift
Machine Dimension 35*2*2.5m
BRANDS
Motor Qingdao Red Flag (Founded in 1976)
Gearbox Jiangsu Jiangyin (specialize in gearbox)
Contactor: Siemens
Temperature controller Omron
Inverter ABB
 
 
Different Models
Model Max Output
SJ-65/30 60kg/h
SJ-90/30 120kg/h
SJ-120/30 250kg/h
 

Nylon Fishing Net Monofilament Production Line

Nylon Fishing Net Monofilament Production Line

Best Services
1. The guarantee period is 1 year and service is available lifelong.
2. Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.
3. Our company supplies the complete technical support documents and the relative drawings of the electric components written in Chinese and English.
4. Our company shall send enough technicians to the Buyer's company for installation, debugging, training and technology transfer till customers can operate independently and manufactures eligible product. 
 
Plastic PA Nylon PP PE Filament Extruding Machine / PA Nylon PP PE Filament Making Machine / PA Nylon PP PE Filament Extruder Machine / PA Nylon PP PE Monofilament Fishing line / PA Nylon PP PE Monofilament Yarn Making Machine / PA Nylon PP PE Polyester Yarn Making Machine

Investment Casting can make use of most metals, most commonly using steel alloys, carbon steel,stainless steel, and tool steel. This process is beneficial for casting metals with high melting temperatures that can not be molded in plaster or metal. Parts that are typically made by investment casting include those with complex geometry such as turbine blades or firearm components. High temperature applications are also common, which includes parts for the automotive, aircraft, and military industries.

Our products cover a wide range of industries including train & Railway, automobile & Truck, construction machinery, mining machinery, forklift, agricultural machinery, shipbuilding, petroleum machinery, construction, valve and pumps, electric machine, hardware, power equipment and so on. We are capable to produce products according to customers' drawings or samples, we focus on both carbon steel and alloy steel. Up to today, more than 100 raw materials and 5, 000 kinds of different products have been developed and produced by us. We are familiar with the material standards of many countries, such as Chinese GB, American ASTM, AISI, German DIN, French NF, Japanese JIS, British BS, Australian AS and Association of American Railroads (AAR ) and other industrial standards.

The process is generally used for small castings, but has produced complete aircraft door frames, steel castings of up to 3 tons  and aluminium castings of up to 100 kg. It is generally more expensive per unit than Die Casting or Sand Casting but with lower equipment cost. It can produce complicated shapes that would be difficult or impossible with die casting, yet like that process, it requires little surface finishing and only minor machining.

Investment casting is used in the aerospace and power generation industries to produce turbine blades with complex shapes or cooling systems. Blades produced by investment casting can include single-crystal (SX), directionally solidified (DS), or conventional equiaxed blades. It is also widely used by firearms manufacturers to fabricate firearm receivers, triggers, hammers, and other precision parts at low cost. Other industries that use standard investment-cast parts include military, medical, commercial and automotive.

Investment casting offers high production rates, particularly for small or highly complex components, and extremely good surface finish (CT4-CT6 class accuracy and Ra1.6-6.3 surface roughness) with very little machining. The drawbacks include the specialized equipment, costly refractories and binders, many operations to make a mold, and occasional minute defects.

Material:
Alloy Steel:ASTM 430;ASTM410;ASTM 416,ect.Carbon 
Steel:WCB,AISI1020;AISI1045;S355J2G3,S235JR,ect.
Stainless Steel:SS304;SS316;SS316L;17-4 PH;ect.Copper:C21000;C26800;C27000;C27200,ect.

Advantage
Can form complex shapes and fine details Many material optionsHigh strength partsVery good surface finish and accuracyLittle need for secondary machining

Applications:
Turbine blades, armament parts, pipe fittings, Lock Parts , handtools, agriculture parts,Marine Parts,medical parts,hardware,automobile parts,ect.

Investment Casting

Investment Casting,Investment Casting Materials,Impeller Investment Casting,Wax Investment Casting

Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com