2CY1.1/14.5-2(KCB-18.3) 3/4 ″ 1450 18.3 1.5 1.45 5 2CY2/14.5-2(KCB-33.3) 3/4 ″ 1450 33.3 2.2 1.45 5 2CY3.3/3.3-2(KCB-55) 1 ″ 1450 55 1.5 0.33 5 2CY3.3/5-2(KCB-55) 1 ″ 1450 55 2.2 0.33 5 2CY5/3.3-2(KCB-83.3) 1 1 / 2″ 1450 83.3 2.2 0.33 5 2CY5/5-2(KCB83.3) 1 1 / 2″ 1450 83.3 3 0.50 5 2CY8/3.3-2(KCB200) 2 ″ 1450 200 4 0.33 5 2CY12/1.3-2(KCB200) 2 ″ 1450 200 4 0.13 5 2CY12/3.3-2(KCB200) 2 ″ 1450 200 5.5 0.33 5 2CY12/6-2(KCB200) 2 ″ 1450 200 5.5 0.60 5 2CY12/10-2(KCB200) 2 1/2″ 1450 200 7.5 1.00 5 2CY18/3.6-2(KCB300) 3 ″ 1000 300 5.5 0.36 5 2CY18/3.6-2(KCB300) 3 ″ 1450 300 7.5 0.36 5 2CY29/3.6-2(KCB483.3) 3 ″ 1450 483.3 7.5 0.36 5 2CY29/10-2(KCB483.3) 3 ″ 1450 483.3 11 1.00 5 2CY38/2.8-2(KCB633-2) 4 ″ 1000 633 11 0.28 5 2CY38/8-2(KCB633-2) 4 ″ 1450 633 22 0.80 5 2CY-60/3-2(KCB960-2) 4 ″ 1450 960 18.5 0.30 5 2CY-60/6-2(KCB960-2) 4 ″ 1450 960 30 0.30 5 Vacuum Type Sealing Machine,Vertical Food Packing Machine, Milk Powder Weigh-Fill-Seal Machine,Washing Powder Weigh-Fill-Seal Machine Wenzhou Selection Technology Co., Ltd. , https://www.zj-packaging.com
The 2CY series gear oil pump, also known as a gear-type lubrication pump, is designed for use in various mechanical systems to convey lubricating oil. It is suitable for oils with viscosity below 10°E (75C.ST) and temperatures under 80°C. This pump can also handle corrosive media and fluids containing solid particles. For high-temperature applications, special heat-resistant materials can be used upon request.
In addition to standard motors, explosion-proof motors can be supplied based on user requirements. Users should specify the explosion-proof grade, such as KB, B2d, or B3d.
The pump consists of several components including the pump body, gears, front and rear covers, safety valve, bearings, and sealing devices. The pump body and covers are typically made of gray cast iron, while the gears can be made from carbon steel, copper, or stainless steel depending on the application.
Safety valves are not included in the 2CY series, but they should be installed in the system to prevent overpressure. Bearings used in this pump include DU bearings, tin bronze bearings, or rolling bearings, which are selected based on the user’s needs.
Shaft seals come in three types: skeleton oil seals, mechanical seals, and packing seals. Each type has different advantages and is suitable for different operating conditions.
The inlet and outlet ports of the 2CY series are British pipe threads (G), and flanges can be added upon request. The pump is connected to the motor via a flexible coupling and mounted on a common base.
Before installation, ensure the pump is undamaged and check all connections. Clean the pipeline before installation and avoid placing weight on the pump to maintain accuracy and longevity. Install a filter at the suction port to prevent debris from entering the pump chamber.
During operation, monitor pressure and vacuum readings to ensure they stay within safe limits. If any abnormal noise or overheating occurs, stop the pump immediately. The safety valve should not be adjusted without proper calibration.
When stopping the pump, turn off the power and close the inlet and outlet valves to prevent backflow.
()
(r/min)
(L/min)
(kw)
(Mpa)
(m)
2cy Series Gear Oil Pump Gear Type Lubrication Pump
Here is a rewritten and improved version of the provided content in English, ensuring it exceeds 500 characters and reads naturally as if written by a human:
---