The reducer is also called big head, reducer, and straight through. One of the chemical fittings is used for connection between two pipes with different diameters. According to the different shapes, they can be divided into two types: concentric small head and eccentric big head. The material of big head includes stainless steel big head, alloy steel, carbon steel big head.
Manufacturing standards can be divided into national standard, electric standard, shipping mark, chemical standard, water mark, American Standard, German standard, Japanese standard and Russian standard.
It can be divided into pushing, pressing, forging, casting and so on.
Connection mode: clamp (fast mounting), welding type and thread type.
Quality and use: the big head and outside with high grade polishing equipment to meet the surface precision requirements; this product is suitable for dairy, food, beer, beverage, pharmaceutical, cosmetics and other industrial fields.
Note that the small head is also suitable for environmental protection and dust removal industry, the pipe diameter is generally rolled and welded by steel plate, and the diameter is different.
Pipe Reducer,Concentric Reducer,Stainless Steel Pipe Reducer,Reducer Pipe He Bei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.ghpipefittings.com
Features&Benefits:
- Dissolves gum, varnish, dirt and carbon deposits
- Assures faster starts and smooth idling
- Helps restore performance and gas mileage
- Extension spray tube included for hard to reach areas
Product Description:
AK-CC5001 CARB CLEAN is a fast-acting carburetor and choke cleaner that dissolves carburetor deposits such as sludge, gum and varnish. Designed to maximize carburetor performance, improve fuel system performance and ensure maximum fuel economy.
Applications:
Recommended for cleaning automatic chokes, carburetor elements, intake parts and ventilating systems. Suitable for general purpose cleaning of non-painted surfaces.
Areas of use:
Also ideally suited as a solvent, degreaser and cleaner
Directions:
Carburetor and linkage
With ignition off and engine cool, remove air filter and entire exterior surface of carburetor including linkage.
Automatic chokes
With engine off, spray carb & choke cleaner on both ends of choke valve and corresponding
Manifold heat control valve
With engine cold, spray carb & choke cleaner on both ends of heat control valve shaft.
Move counterweight up and down until valve moves freely. If necessary, tap gently with a light
Pcv valves
Disconnect crank case side of pcv valve and, with the engine running, spray carb &
Choke cleaner into open end of valve while working the plunger back and forth.
Important
* if spilled or sprayed on painted surface, wipe off or wash off immediately.
Storage:
Beware: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 ° C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep containers tightly closed in a dry, cool and well-ventilated place. Please observe the storage instructions for aerosols!
AUTOKEM CARB CLEANER is Professional Quality! This product effectively removes gum, resin, oil, greasy deposits and dirt from carburetors and fuel systems, help improve fuel consumption, improve engine idle and help prevent stalling!
Features&Benefits:
- Dissolves gum, varnish, dirt and carbon deposits
- Assures faster starts and smooth idling
- Helps restore performance and gas mileage
- Extension spray tube included for hard to reach areas
Product Description:
AK-CC5001 CARB CLEAN is a fast-acting carburetor and choke cleaner that dissolves carburetor deposits such as sludge, gum and varnish. Designed to maximize carburetor performance, improve fuel system performance and ensure maximum fuel economy.
Applications:
Recommended for cleaning automatic chokes, carburetor elements, intake parts and ventilating systems. Suitable for general purpose cleaning of non-painted surfaces.
Areas of use:
Also ideally suited as a solvent, degreaser and cleaner
Directions:
Carburetor and linkage
With ignition off and engine cool, remove air filter and entire exterior surface of carburetor including linkage.
Automatic chokes
With engine off, spray carb & choke cleaner on both ends of choke valve and corresponding
Manifold heat control valve
With engine cold, spray carb & choke cleaner on both ends of heat control valve shaft.
Move counterweight up and down until valve moves freely. If necessary, tap gently with a light
Pcv valves
Disconnect crank case side of pcv valve and, with the engine running, spray carb &
Choke cleaner into open end of valve while working the plunger back and forth.
Important
* if spilled or sprayed on painted surface, wipe off or wash off immediately.
Storage:
Beware: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 ° C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep containers tightly closed in a dry, cool and well-ventilated place. Please observe the storage instructions for aerosols!
Generally, hot rolled coil is applied very well, and it can save cost.
External processing: we can map and sample non-standard products according to user requirements.
Ak-Cc5001 Carburetor and Choke Cleaner
Model NO.: AK-CC5001
HS Code: 3402
Model NO.: AK-CC5001
HS Code: 3402
AUTOKEM CARB CLEANER is Professional Quality! This product effectively removes gum, resin, oil, greasy deposits and dirt from carburetors and fuel systems, help improve fuel consumption, improve engine idle and help prevent stalling!