Fzg20 High Quality GMP Standard Vacuum Freeze Dryer

Model NO.: FZG-20
Outer Size: 1150*810*1200mm
Baking Tray: 48
Certification: ISO9001
Application: Chemical,Food, Pharmaceutic
Voltage: Design for Different Country
Usage: Reduce Material′s Moisture
Material: 304 Stainless Steel
After-Sales Service: Engineers Available to Service Abroad
Heating Source: Steam, Electricity, Gas, Oil
Raw Material: Heat Sensitive Raw Materials
Trademark: WANDA
Transport Package: Export Wooden Case
Specification: 1400kg
Origin: Liaoning, China (Mainland)
Model NO.: FZG-20
Outer Size: 1150*810*1200mm
Baking Tray: 48
Certification: ISO9001
Application: Chemical,Food, Pharmaceutic
Voltage: Design for Different Country
Usage: Reduce Material′s Moisture
Material: 304 Stainless Steel
After-Sales Service: Engineers Available to Service Abroad
Heating Source: Steam, Electricity, Gas, Oil
Raw Material: Heat Sensitive Raw Materials
Trademark: WANDA
Transport Package: Export Wooden Case
Specification: 1400kg
Origin: Liaoning, China (Mainland)
FZG20 High Quality GMP Standard Vacuum Freeze Dryer

1. High drying speed
2. Suitable for heat sensitive materials
3. Less heat loss
4. No impurity material mixed, meet the "GMP" standard
5. Static dryer, keeping the shape of materials

                                                                                                                                                   

Scope of application

It is suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose at high temperature .It is wide used in pharmaceutical , chemical ,foodstuff electronic industries.
 
 
Principle
Vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.
Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved. it use SK series water ring vacuum pump sets, condensate can not be used and the investment could be saved .
 

 Fzg20 High Quality GMP Standard Vacuum Freeze Dryer



Features
1. Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force     become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporator can be saved. 
2. The heat source for operation of evaporation may be low pressure steam or surplus heat steam. 
3. The heat loss of evaporator is less; 
4. Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material. It is in conformity with the requirement of GMP; 
5. It belongs to static drier. So the shape of raw material to be dried can not be destroyed.

 

 
Product technical parameter

Fzg20 High Quality GMP Standard Vacuum Freeze Dryer


Fzg20 High Quality GMP Standard Vacuum Freeze Dryer



Our company

LIAOYANG WANDA MACHINERY CO.,LTD is specialized in design, development, manufacture and sale of pharmaceutical, chemical and packaging machinery.Our products include filter, centrifuge, mixer, tablet press machine, granulator, dryer, packing machine, teabag packing machine, etc.

Looking to the future with a commitment to design innovation and quality products, supported by an outstanding level of customer service. The unexcelled quality medical machinery can be easily obtained from us because we maintain the quality and standard of our products from incoming raw materials to the finished products. Our company follows strict quality controls and various systematic procedures. We take utmost care of quality at every stage of the manufacturing process. Our research and development wing is our asset that develops and incorporates innovative ideas and products.

Our Team is full of experienced and qualified professionals, who have sound knowledge about the quality of our medical machinery. Our products are far sold to Europe, U.S.A., and the southeast Asia. They are well received by customers both at home and abroad.
 



Fzg20 High Quality GMP Standard Vacuum Freeze Dryer

Fzg20 High Quality GMP Standard Vacuum Freeze Dryer


Contact us 

Fzg20 High Quality GMP Standard Vacuum Freeze Dryer
  FZG20 High Quality GMP Standard Vacuum Freeze Dryer

1. High drying speed
2. Suitable for heat sensitive materials
3. Less heat loss
4. No impurity material mixed, meet the "GMP" standard
5. Static dryer, keeping the shape of materials

                                                                                                                                                   

Scope of application

It is suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose at high temperature .It is wide used in pharmaceutical , chemical ,foodstuff electronic industries.
 
 
Principle
Vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.
Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and every could be saved. it use SK series water ring vacuum pump sets, condensate can not be used and the investment could be saved .
 

 Fzg20 High Quality GMP Standard Vacuum Freeze Dryer



Features
1. Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force     become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporator can be saved. 
2. The heat source for operation of evaporation may be low pressure steam or surplus heat steam. 
3. The heat loss of evaporator is less; 
4. Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material. It is in conformity with the requirement of GMP; 
5. It belongs to static drier. So the shape of raw material to be dried can not be destroyed.

 

 
Product technical parameter

Fzg20 High Quality GMP Standard Vacuum Freeze Dryer


Fzg20 High Quality GMP Standard Vacuum Freeze Dryer



Our company

LIAOYANG WANDA MACHINERY CO.,LTD is specialized in design, development, manufacture and sale of pharmaceutical, chemical and packaging machinery.Our products include filter, centrifuge, mixer, tablet press machine, granulator, dryer, packing machine, teabag packing machine, etc.

Looking to the future with a commitment to design innovation and quality products, supported by an outstanding level of customer service. The unexcelled quality medical machinery can be easily obtained from us because we maintain the quality and standard of our products from incoming raw materials to the finished products. Our company follows strict quality controls and various systematic procedures. We take utmost care of quality at every stage of the manufacturing process. Our research and development wing is our asset that develops and incorporates innovative ideas and products.

Our Team is full of experienced and qualified professionals, who have sound knowledge about the quality of our medical machinery. Our products are far sold to Europe, U.S.A., and the southeast Asia. They are well received by customers both at home and abroad.
 



Fzg20 High Quality GMP Standard Vacuum Freeze Dryer

Fzg20 High Quality GMP Standard Vacuum Freeze Dryer


Contact us 

Fzg20 High Quality GMP Standard Vacuum Freeze Dryer
 

Home Appliance Plastic Molding refers to washing machine control anel plastic mould, washing machine tub mould and its plastic accessories, air condition frame Plastic Injection Mould and its plastic accessories, ice box or Refrigerator Plastic Injection Mould and its plastic accessories, and so on.


Mould Steel: 2738HH, NAK80, 738, 2344, S136, SDK61, P20, PX5 etc.

Mould Life: 50~100 shots
Material: PP
Cavity: 1*1
Applicable range: Home appliance
Lead Time: 35-45 days
Hot runner: (according to the customer's request and product style)
Standard part: PUNCH, MISUMI

First trial equipment: 380T Injection Machine( moreover we also have 90-700T, 750-1300T Injection Machine. There are robots for each 90-380T Injection Machine to meet the customer's bulk production requirement.


Washing machine plastic control panel injection mould


The first mould tryout success rate is above 90%


Quotation: Provide quotation in 24 hours after received the customer's drawing.
The profile: 2D/3D drawing or samples
Manager: Concentrate on project tracking and after service
Engineer: 30-50 excellent engineers, who have many years experience and English communicating well.
The purchase department use EPR system to make sure buying materials in time.
70-130 experienced workers can meet your request of batch production.
Quality department: 15 members quality control workers, testing the mould and parts by CMM and projector.

Shipping incoterms: FOB/CIF/DDU by sea shipping or air shipping

Washing machine control rack plastic mould


Washing machine plastic top panel mould


If you have any doubts about plastic washing machine control panel mould, please don't hesitate to contact us at any time, we are very pleased to give you response in time, warmly welcome to visit our company, we are looking forward to hearing from you, thank you very much.


Home Appliance Injection Mould

Home Appliance Injection Mould,Home Appliance Mould,LED Lighting Plastic Injection Mould,Refrigerator Plastic Injection Mould

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com