It is a machine that sits on a table or bench, and has an opening through which you feed insulated wire.
Instruction:
press the setting screw tightly, adjust the knifepoint in the right place, try peeling the cable again until you reach the ideal result, then tighten the screw bolt.
the largest channel and the knifes are still cutting deeply into the metal) adjust the lower mandrel setting screw (which will raise the upper
cutters/rollers), put the knife axes up tightly to the desired place (make sure that both the left and right sides rise or fall at the same time
in order to keep the knife and main axes level).
Cable Wire Peeling Machine Cable Wire Peeling Machine, Cable Peeling Machine, Wire Peeling Machine, Cable Peeling Tool,PVC Insulated Cable Peeler TAIZHOU GUANGLONG WIRE STRIPPING MACHINE MANUFACTURING CO.,LTD , http://www.scrap-wire-stripper.com
 A. Size: per drawing
B. Material: Brass etc
C. Finish: All kind
D. MOQ: 10000PCS
E. Sample lead time: 15days
Similar Products:(Per drawing)
 Machining basic parameters
1
Material
copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials
2
Specifications
M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM.
3
Surface Treatment
white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc.
4
Tolerance
Outer diameter tolerance +/- 0.01mm;Â Â Â Length tolerance +/- 0.01mm
Threads can be checked by go-and-not-go-gauge.
5
Processing Methods
manufacture of blue drawing, sample and raw material
  Production equipment
Â
 Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Product Name: hardware Round Head Knurled Embedded Brass Nut(nut-01)
 A. Size: per drawing
B. Material: Brass etc
C. Finish: All kind
D. MOQ: 10000PCS
E. Sample lead time: 15days
Similar Products:(Per drawing)
 Machining basic parameters
1
Material
copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials
2
Specifications
M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM.
3
Surface Treatment
white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc.
4
Tolerance
Outer diameter tolerance +/- 0.01mm;Â Â Â Length tolerance +/- 0.01mm
Threads can be checked by go-and-not-go-gauge.
5
Processing Methods
manufacture of blue drawing, sample and raw material
  Production equipment
Â
 Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
It's quite simple because the stripped wire comes out the other end in a matter of seconds.
Many of these pvc insulated cable peelers can handle wire up to 2 inches thick.
1.If there is an anomaly: when the knife peels the side or the cable is not cut tighten the upper tension bolts which faces the problem;
2. If line core in the cable is deeply cut, please adjust the loosen the upper pressure setting screw, if this is not possible (as you`re already in
Hex Flange Nut/Hexagon Nuts with Flange/Flange Nuts
Trademark: OEM
Specification: M1.0-M16(Nut-01)
Origin: Guangdong, China (Mainland)
Trademark: OEM
Specification: M1.0-M16(Nut-01)
Origin: Guangdong, China (Mainland)
Product Name: hardware Round Head Knurled Embedded Brass Nut(nut-01)