Mining machine accessories are tools or components that can assist the normal operation of the mining machine. There are many of them, including: power cable, fan control board, host device power supply, which is used to convert the voltage. This is a must-have accessory for the mining machine. Some of them are relatively Large mining machine manufacturers can give matching power supplies as gifts when purchasing mining machines. In addition, cables, fans, and control boards are all mining machine maintenance accessories. If the original device is damaged, the fan and control board can be used as replacements. The host device is usually a personal computer or a Raspberry Pi, which is only used to set up the mining machine startup, and the mining machine can also be used for other purposes after the mining machine is started.
Which is better, PC mining machine power supply or ordinary power supply?
ASIC miner power,APW12 , APW13 , Cooler , P221C , P221D , P21 PSU Hony Engineering Plastics Limited , https://www.honyplastic.com
Diameter
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
3D140 220kW
mm
m³/h
MPa
m³/h
MPa
m³/h
MPa
m³/h
MPa
m³/h
MPa
m³/h
MPa
m³/h
MPa
60
3.19
53
4.49
53
6.20
52
8.48
52
11.97
49
16.96
34
23.44
25
65
3.74
45
5.27
45
7.28
44
9.95
44
14.05
42
19.90
29
27.51
21
70
4.34
38
6.11
38
8.44
38
11.54
38
16.29
36
23.08
25
31.91
18
75
4.98
33
7.01
33
9.69
33
13.25
33
18.70
31
26.50
22
36.63
16
80
5.67
29
7.98
29
11.02
29
15.07
29
21.28
27
30.15
19
41.67
14
85
6.40
26
9.01
26
12.44
26
17.02
26
24.02
24
34.03
17
47.05
12
90
7.17
23
10.10
23
13.95
23
19.08
23
26.93
21
38.16
15
52.74
11
95
7.99
21
11.25
21
15.54
20.5
21.26
20.5
30.01
19
42.51
13.5
58.77
10
100
8.86
19
12.47
19
17.22
18.5
23.55
18.5
33.25
17
47.11
12.5
65.12
9
105
9.77
17
13.75
17
18.98
17
25.97
17
36.66
16
51.93
11
71.79
8
110
10.72
15.5
15.09
15.5
20.84
15.5
28.50
15.5
40.23
14.5
57.00
10
78.79
7
115
11.71
14
16.49
14
22.77
14
31.15
14
43.97
13
62.30
9
86.12
6.5
120
12.76
13
17.96
13
24.80
13
33.92
13
47.88
12
67.83
8.5
93.77
6
125
13.84
12
19.48
12
26.90
12
36.80
12
51.95
11
73.60
8
101.74
5.5
130
14.97
11
21.07
11
29.10
11
39.80
11
56.19
10
79.61
7
110.05
5
135
16.14
10.2
22.72
10.2
31.38
10.2
42.92
10.2
60.60
9.5
85.85
6.5
118.67
4.8
140
17.36
9.5
24.44
9.5
33.75
9.5
46.16
9.5
65.17
9
92.33
6
127.63
4.5
Lianyungang Landmark Co., Ltd was established in 1992. In 2006, we built our factory, Tianjin Jingcheng High-Pressure Pump Manufacturing Co., Ltd, focusing on ultra-high-pressure pumps and cleaning machines. With the business philosophy of "credit is the foundation, quality is the first", we continuously research and design exquisite equipment to win the trust of both old and new customers and develop together with them.
We invested over 80 million RMB in building a factory in the "Bohai Economic Center," located in the Jinnan Shuanggang Industrial Park. The factory covers an area of 8,000 square meters. At the same time, we invested more than 10 million RMB to purchase advanced production equipment such as high-precision CNC lathes, milling machines, grinders, and boring machines. We have nearly 100 high-quality employees, two-thirds of whom are senior technical and management staff.
Our company, as a high-tech enterprise, integrates research, production, sales, and service. We have always been committed to technological innovation and the development of high-pressure reciprocating piston pumps and high-pressure water jet equipment. We also collaborate with well-known international companies for high-end technology and international standards, researching and developing a series of high-pressure pumps that are widely used in industries such as petroleum, coal, chemicals, power, machinery, metallurgy, food, pharmaceuticals, textiles, and descaling hot-rolled steel. We can also provide customers with specific application high-pressure pumps and high-pressure water jet cleaning technology consulting and equipment set supply.
Our pump series products and complete cleaning equipment sets have been highly praised by most users, known as "International quality" and "domestic price" high-end products. After years of hard work, we successfully developed the brand Jingcheng from Tianjin to China and beyond. Our high-pressure pumps and water jetting equipment have passed the ISO9001 quality management system certification, health, safety, and environmental management system certification, and mining product safety certification, among others. Through the relentless efforts of the R&D department, we have obtained national patents, giving us unique technical advantages and absolute brand competitiveness, making us more competitive in the market.
We are very grateful to all pump and cleaner users at home and abroad for their concern, trust, and support over the years. We will continue to provide quality products and good service.
Factory:
JinCheng pumping systems provide an effective, efficient, and reliable solution to your high-pressure water needs.
Welcome to visit our factory
PC mining machine power supply and ordinary power supply are better than PC mining machine power supply, because PC mining machine power supply is more durable and more professional, hope this answer can help you
Miner power supply general life
The life of the power supply depends on the quality of the components in the power supply and the conditions of use. Normally, a good power supply can work 12 hours a day for 5-6 years without any problem! So don't cause man-made damage, be careful not to start and shut down the computer frequently, keep the power supply in good heat dissipation, and clean the dust regularly.
What topology is used for the mining machine power supply
forward topology. In the mine, the power supply on the mine uses the forward topology power supply. Generally, the forward topology power supply is used in mines with high power or in the occasion of multiple outputs, and the output transient control of the forward topology power supply is better. Safe, high output rate.
How big is the power supply of the mining machine?
According to the size of the mining machine. If the load is a motor, light bulb or capacitive load, and the current is large at the moment of power-on, an appropriate power supply should be selected to avoid overload. If the load is a motor, consider voltage reversal at shutdown.
The power supply of the mining machine is fried because of what
Temperature is too high. The short circuit or overweight of the load leads to overheating, internal self-excitation of the power supply, excessive input voltage, failure of no-load protection, failure of output protection, and high frequency of the power supply. If it is a commercial machine, it is unlikely that there is a quality problem with the internal components.
How to forcibly power on the power supply of Innosilicon T3 ten mining machine
Miner power supply. It can be powered by plugging the cord into the power supply. Before repairing the faulty power supply, use the voltage measurement method to power on to determine whether the power supply has voltage output, test that the fan with voltage output does not turn, and use a multimeter to measure the fan port. If there is 12V voltage, it means that the output voltage is normal, just replace the same type of fan directly.
What power cord is used for the E10 miner?
The E10 miner needs to use NYPTJ138A power cord. The E10 mining machine has relatively high requirements on the power cord, and the NYPTJ138A power cord must be used to work normally.
Is the mining machine power supply the same as the computer power supply?
Hello friend. The power supply of the mining machine uses power electricity. It is 380 volts. The computer uses civilian electricity, which is 220 volts. They are not the same. Agree with my point of view, please adopt, thank you.
How many watts of power does the 8-card 1660s mining machine use?
The eight-card mining machine 1660s consumes about 750 watts per hour, which is about 0.75 kWh. The power supply is not outputting at full capacity all the time, but supplies power according to the demand. Now 1080 single card is 180w, and six of them are running at 100%, which is 1080w, and the superposition of other hardware power consumption is enough. But I only heard that the demand for machines to crack passwords is so high.
How to change the power output line of the mining machine
A power cord is required. To replace the power output line of the mining machine, you need to buy a CPU power supply line. Cut off the CPU power supply line of the original power supply and connect it with a new one. Just seal the wiring port with insulating tape.
High Quality Industrial 36000psi High Pressure Piston Pump (FJ0125)
Model NO.: 36000PSI high pressure piston pump (FJ0125)
Flow Rate: 15 - 530 L/M, 3.7-140.2G/M
Size: 2.6*1.5*1.7m³, 2.6*1.5*1.7m³, etc.
Power: Hydraulic
Max Input Power: 90-500kw
Stroke: Internal Deacceleration
Theory: Plunger Pump, Piston Pump
Plunger Diameter: 14.3mm-52mm
Accessories: Gauges, High Pressure Fittings, High Pressure Hose
Trademark: JINGCHENG
Transport Package: Container: 3500*1800*2200mm
Specification: CE; ISO9001; WJTA
Origin: Tianjin
HS Code: 84243000
Our high-pressure water pumping systems can be used for a variety of applications where high-pressure and ultra-high-pressure water streams are employed:
Â
Cleaning
Jetting
Blasting
Cutting
Â
Jincheng Pumping systems have been used in many industries. Some of the industries include:
Â
Construction
Manufacturing
Mining
Oil field service
Industrial Cleaning
Â
There are a variety of optional features available with our diesel and electric pumping systems. Customize the pumping system as your application warrants. Options are available within equipment categories such as:
Â
Power options
Control Panels
Motor Control
Pressure Gauges
Rupture Disc Assembly
Relief Valve
Suction Supply
Noise Dampening
Tow Bar (on base)
Paint Color
Â
The Advanced Design ("AD") philosophy of JinCheng's personnel is carried over into the diesel and electric pumping systems. JinCheng pumping systems use time-proven technology repackaged to create a simple, easy-to-maintain, high-pressure pump with fewer dynamic liquid-end parts than any known power pump on the market today.