PEEK film , PEI film , Polyimide film , PC film , BOPS film, PSU film, PPSU film , PA12 film Hony Engineering Plastics Limited , https://www.honyplastic.com
Diameter
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
FLOW
PRESSURE
3D140 220kW
mm
m³/h
MPa
m³/h
MPa
m³/h
MPa
m³/h
MPa
m³/h
MPa
m³/h
MPa
m³/h
MPa
60
3.19
53
4.49
53
6.20
52
8.48
52
11.97
49
16.96
34
23.44
25
65
3.74
45
5.27
45
7.28
44
9.95
44
14.05
42
19.90
29
27.51
21
70
4.34
38
6.11
38
8.44
38
11.54
38
16.29
36
23.08
25
31.91
18
75
4.98
33
7.01
33
9.69
33
13.25
33
18.70
31
26.50
22
36.63
16
80
5.67
29
7.98
29
11.02
29
15.07
29
21.28
27
30.15
19
41.67
14
85
6.40
26
9.01
26
12.44
26
17.02
26
24.02
24
34.03
17
47.05
12
90
7.17
23
10.10
23
13.95
23
19.08
23
26.93
21
38.16
15
52.74
11
95
7.99
21
11.25
21
15.54
20.5
21.26
20.5
30.01
19
42.51
13.5
58.77
10
100
8.86
19
12.47
19
17.22
18.5
23.55
18.5
33.25
17
47.11
12.5
65.12
9
105
9.77
17
13.75
17
18.98
17
25.97
17
36.66
16
51.93
11
71.79
8
110
10.72
15.5
15.09
15.5
20.84
15.5
28.50
15.5
40.23
14.5
57.00
10
78.79
7
115
11.71
14
16.49
14
22.77
14
31.15
14
43.97
13
62.30
9
86.12
6.5
120
12.76
13
17.96
13
24.80
13
33.92
13
47.88
12
67.83
8.5
93.77
6
125
13.84
12
19.48
12
26.90
12
36.80
12
51.95
11
73.60
8
101.74
5.5
130
14.97
11
21.07
11
29.10
11
39.80
11
56.19
10
79.61
7
110.05
5
135
16.14
10.2
22.72
10.2
31.38
10.2
42.92
10.2
60.60
9.5
85.85
6.5
118.67
4.8
140
17.36
9.5
24.44
9.5
33.75
9.5
46.16
9.5
65.17
9
92.33
6
127.63
4.5
Lianyungang Landmark Co., Ltd was established in 1992. In 2006, we built our factory, Tianjin Jingcheng High-Pressure Pump Manufacturing Co., Ltd, focusing on the research and manufacturing of ultra-high-pressure pumps and cleaning machines. With a business philosophy of "credit is the basis, quality is the first," we continuously research and design exquisite equipment to win the trust of both old and new customers and develop together with them.
We invested over 80 million RMB for the factory building in the "Bohai Economic Center," located at Jinnan Shuanggang Industrial Park. The factory covers an area of 8,000 square meters. Additionally, we invested more than 10 million RMB to purchase a number of high-precision CNC lathes, milling machines, grinders, and other advanced production equipment. We have nearly 100 high-quality employees, two-thirds of whom are senior technical and management staff.
As a high-tech enterprise, we integrate research, production, sales, and service. We are committed to technological innovation and R&D of high-pressure reciprocating piston pumps and high-pressure water jet equipment. We also collaborate with well-known international companies to bring in high-end technology and meet international standards. Our series of high-pressure pumps are widely used in industries such as petroleum, coal, chemicals, electric power, machinery, metallurgy, food, pharmaceuticals, textiles, and descaling hot-rolled steel. We can also provide customers with specific use high-pressure pumps and high-pressure water jet cleaning technology consulting and equipment set supply.
Our pump series products and complete cleaning equipment sets have been praised by the majority of users. They are known as "International quality" and "domestic price" high-end products. After years of development, we successfully developed the brand "Jingcheng" from Tianjin to China and beyond. Our high-pressure pumps and water jetting equipment have passed the ISO9001 quality management system certification, health, safety, and environmental management system certification, and mining product safety certification, among others. Through the continuous efforts of our R&D department, we have obtained national patents, giving us unique technical advantages and absolute brand competitiveness, making us more competitive in the market.
We are very grateful to all pump and cleaner users at home and abroad for your concern, trust, and support. We will continue to provide quality products and excellent service.
Factory:
JinCheng pumping systems provide an effective, efficient, and reliable solution to your high-pressure water needs.
Welcome to visit our factory
High Quality Industrial 8000psi High Pressure Water Pump Price (FJ0130)
Model NO.: 8000PSI high pressure water pump price (FJ0130)
Flow Rate: 15 - 530 L/M, 3.7-140.2G/M
Size: 2.6*1.5*1.7m³, 2.6*1.5*1.7m³, etc.
Power: Hydraulic
Max Input Power: 90-500kw
Stroke: Internal Deacceleration
Theory: Plunger Pump, Piston Pump
Plunger of Diameter: 14.3mm-52mm
Accessories: Gauges, High Pressure Fittings, High Pressure Hose
Trademark: JINGCHENG
Transport Package: Container: 3500*1800*2200mm
Specification: CE; ISO9001; WJTA
Origin: Tianjin
HS Code: 84243000
Our high-pressure water pumping systems can be used for various applications where high-pressure and ultra-high-pressure water streams are employed:
Â
Cleaning
Jetting
Blasting
Cutting
Â
Jincheng Pumping systems have been used in many industries. Some of the industries include:
Â
Construction
Manufacturing
Mining
Oil field service
Industrial Cleaning
Â
There are a variety of optional features available with our diesel and electric pumping systems. Customize the pumping system according to your application. Options are available within equipment categories such as:
Â
Power options
Control Panels
Motor Control
Pressure Gauges
Rupture Disc Assembly
Relief Valve
Suction Supply
Noise Dampening
Tow Bar (on base)
Paint Color
Â
The Advanced Design ("AD") philosophy of JinCheng's personnel is carried over into the diesel and electric pumping systems. JinCheng pumping systems use time-proven technology repackaged to create a simple, easy-to-maintain, high-pressure pump with fewer dynamic liquid-end parts than any known power pump on the market today.
1. Low crystalline PEEK polyether ether ketone film High temperature resistant special plastic film
Polyether ether ketone (poly-ether-ether-ketone, referred to as PEEK) is a polymer consisting of a ketone bond and two ether bond repeating units in the main chain structure, which is a special polymer material. It is a special polymer material with excellent physical and chemical properties such as high temperature resistance, chemical corrosion resistance, etc. It is a kind of semi-crystalline polymer material.
PEEK film is a semi-crystalline, high-performance speciality film for a wide range of applications made from PEEK polymer, which has high temperature resistance, light weight, excellent mechanical properties and durability, excellent radiation resistance, hydrolysis resistance, chemical resistance, excellent electrical insulation and wear resistance, good barrier properties and flame retardant properties, low toxicity of the combustion products, low water absorption, halogen-free and good processing performance. Good processing performance and other characteristics.
PEEK film applications:
Electrical insulating materials, pressure sensitive tapes, printed circuit board substrates, high temperature labels, high speed motor gaskets, mobile phone hinge gaskets, soft surface heaters, aerospace insulating materials, pressure transducer diaphragms, acoustic loudspeaker diaphragms, and thermal barrier materials for lead-free soldering.
2.PA12 (poly(dodecanelimide)) film
Material PA12 Thickness: 0.05-0.8MM Length: customised Width: ≤1020 Colour: natural Surface texture: glossy/matte matt/medium sanded Melting point: 176°C MOQ 1t.
PA12 is nylon 12, also known as poly dodecalactam, poly laurolactam, is a long carbon chain nylon. Comprehensive performance is excellent, low water absorption, good low temperature resistance, good air tightness, good mechanical properties and electrical properties. With excellent mechanical properties and high durability as well as the highest possible reliability, its performance can be greatly improved by modification through chemical or physical methods. For example, through the addition of glass fibre material can be achieved after a substantial improvement in water absorption and dimensional stability, and can improve the strength and toughness of the resin.
The thermal decomposition temperature of PA12 is greater than 350°C, and the long-term use temperature is 80-90°C. The airtightness of PA12 film is good, and the water vapour transmission rate is 9g/m2.
PA12 preparation film sheet
PA12 film transparent, non-toxic, water vapour and gas (O2, N2, CO2) transmission rate is low, stored in boiling water for a year performance remains unchanged, can be used for the production of film sheet, with which to protect and package food, with the aroma of preservation, resistance to steam disinfection and the advantages of good low-temperature sex. Nylon 12 and metal adhesion is good, when bonding food, the sealing value of 100%, high peel strength.
Optical, automotive, aerospace, packaging films, sports and leisure products, cable protectors, high-end sports shoe soles, fabrics, etc.
3.PEI Polyetherimide Film
Colour: natural or black Surface texture: glossy/matte, matte/medium sand Thickness: 0.025-0.5MM Width: ≤1050MM Temperature resistance: Relative temperature index 170°C
Characteristic:
Amorphous thermoplastic high temperature resistant film. (Can be used in the range of 170℃-180℃ for a long time)
Very high mechanical properties such as strength and modulus at high temperatures. Excellent dimensional stability. (Low creep sensitivity, low and uniform coefficient of thermal expansion)
Excellent insulation properties with stable dielectric constant (Dk) and low loss factor (Df) over a wide temperature and frequency range.
Excellent insulating properties, stable dielectric constant (Dk) and low loss factor (Df) over a wide range of temperatures and frequencies.
Excellent chemical resistance to most greases, detergents and disinfectants. Withstands a wide range of disinfection methods.
Penetrates visible light, infrared and microwaves.
APPLICATION OF PEI FILM
The main application of PEI film: electrical and electronic industries with special requirements such as waterproof, dustproof and breathable, speaker diaphragm, high temperature resistant supercapacitor. As well as new energy hydrogen production, green hydrogen, acid hydrogen production and so on.
4.PSU film has the following performance characteristics:
Mechanical properties:
High strength: PSU film has high tensile and flexural strength, for example, the tensile strength can still reach 60MPa at 150℃, which is better than general engineering plastics such as POM, PA and PC, etc. The mechanical properties at room temperature can be maintained at high temperatures, which is suitable for applications requiring mechanical strength.
High hardness and rigidity: The structure of PSU film contains highly conjugated diphenylsulfone and diphenylpropane groups, which gives it high rigidity and hardness, and is not easy to fracture and creep, but also has a certain degree of flexibility and toughness.
Thermal properties:
High temperature resistance: can be used in a wide range of temperatures, heat distortion temperature of up to 174 ℃, long-term use of temperature up to 160 - 190 ℃, can be used for a long time in -100 - 175 ℃, has excellent resistance to heat and oxygen aging, such as 150 ℃ by 2 years of heat and oxygen aging, the tensile yield strength and heat distortion temperature does not fall but rise, the impact strength can still keep the original value of 55%!
Low coefficient of thermal expansion: when the temperature changes, the dimensional stability is good, not easy due to thermal expansion and contraction and large deformation.
Chemical stability:
Corrosion resistance: good resistance to acids, alkalis and salt solutions, etc. It also has good resistance to detergents and hot water vapour, but it is not resistant to aromatic hydrocarbons and halogenated hydrocarbons. It can be used to manufacture parts of chemical equipment, such as pumps and valves, filters, heat exchangers, etc. It is also often used in medical devices related to repeated cleaning and disinfection.
Low ionic impurity level: PSU film has a low level of ionic impurities, which helps to maintain its performance stability in electronic and electrical applications, for example, it can be used to make printed circuit boards, capacitor film and other electrical and electronic product parts.
Electrical properties: good electrical insulation, can still maintain good electrical insulation after placed in high temperature environment, water and humid air, low dielectric constant and loss factor, but high dielectric strength and volume resistivity, and in a wide range of temperatures and frequencies (even microwave frequencies) can be maintained constant, can be used to make electrical and electronic parts, such as contactors, connectors, transformer insulation, coil bobbins and so on.
Other properties:
Dimensional stability: PSU film has good dimensional stability, small moulding shrinkage, low moisture absorption, water absorption is usually 0.2% - 0.4%, fully dry before use and prevent re-absorption of moisture, can ensure that the water content of 0.1% or less, which helps to ensure the precision and dimensional stability of the products.
Good hydrolysis resistance: in a humid environment or in contact with water, it can still maintain good performance and is not easy to hydrolysis reaction.
Transparency: PSU film is usually a semi-transparent or transparent material, presenting an amber colour with a certain degree of transparency, which can be used to manufacture products that require a transparent or semi-transparent appearance, such as certain medical devices, optical parts, etc.
Flame retardant: PSU film itself has good flame retardant, can meet certain safety requirements.
Ease of processing: PSU film is easy to process and mould, and can achieve precise tolerance, and can be moulded by injection moulding, extrusion and other common processing methods to manufacture various products.
5.BOPS film (bi-oriented polystyrene film) is a polystyrene film made by bi-oriented stretching technology. It has excellent physical and chemical properties and is widely used in various packaging and industrial applications.
BOPS films have the following key properties:
High Transparency: BOPS films are highly transparent and provide clear vision.
Excellent electrical properties: its dielectric constant is stable between 2.4 and 2.7 and is virtually unaffected by frequency changes, with an angular tangent of dielectric loss of only 5 x 10^-4, the lowest of all plastic films.
Good mechanical properties: BOPS films have high tensile and impact strengths, making them suitable for a wide range of packaging needs.
Environmentally friendly: no harmful substances such as hydrogen chloride are produced during incineration and it is easy to recycle.
Production process and application areas of BOPS films
BOPS films are produced mainly through bi-directional stretching technology, which significantly improves the toughness and mechanical properties of polystyrene films, making them widely used in the packaging sector. Specific applications include:
Food packaging: Due to its non-toxicity, high transparency and good printing performance, BOPS film is commonly used in the packaging of processed food, especially fresh fruit and vegetable preservation packaging
Confectionery packaging: BOPS films are also widely used in confectionery packaging due to their high gloss and excellent twisting properties.
Defence industry and high technology: thanks to its excellent electrical and mechanical properties, BOPS film is also used in the manufacture of telecommunications equipment such as high-frequency cable insulation and variable capacitors.
6.Ultra-thin optical grade PMMA film
Polymethyl methacrylate (polymethyl methacrylate), referred to as PMMA) is a polymer, also known as acrylic, acrylic (Acrylic) or Plexiglas. It has the advantages of high transparency, low price, easy mechanical processing, etc., and is often used as a substitute material for glass.
Features
1.Has excellent weather resistance, low moisture and high light transmission, low light elasticity coefficient, good processing performance, non-toxic and excellent overall performance.
2.Acrylic protective film on the protected material has good adhesion properties, in the material handling and processing, the protective film will not buckle, fall off, now many of the protective film most of the self-adhesive or electrostatic adsorption, so that it can be very good adherence to the surface of the goods.
3.Acrylic protective film has good weather resistance and adhesion stability, after several days or long sticker peel strength growth is not significant, easy to remove, in the removal of the protected surface, there is no residual adhesive residue.
4.Acrylic protective film can have good processing adaptability, to meet the needs of deep processing of the protected object.
5.The film can be printed, can be coloured, can be pasted, outdoor exposure of long-term colour and gloss stability, excellent UV resistance.
PMMA film applications
1.PVA protective layer for polarising film.
Low moisture permeability and high transmission optical film. Solutions for different widths/thicknesses and surfaces.
2.Application in reflective materials.
Specialised PMMA reflective films for road marking and signage boards. It has excellent optical properties and weather resistance; it also provides excellent processing properties such as scratch resistance, printing and cut & paste, and meets the requirements for long-term outdoor use. DF-PMMA can be widely used in traffic signs, sign boards, safety signs, vehicles, and other areas where reflectivity is required.