Main feature of anchor mining drilling machine:
7,The mining drilling machine can meet three-wing drill drilling, DTH hammer drilling, casing drilling, drill pipe / casing complex drilling, single / double/ triple rotary spray, fixed spray, swing spray and so on .
Top Drive Drilling Rig,Top Drive Drilling,Top Drive Rig,Top Drive In Drilling Rig JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrilling.com
1, The anchor drill rig with full hydraulic control, Operation is convenient and flexible, easy shifting, good maneuverability, saving time and labor.
2, Drill rotary machine driven by a double hydraulic motor, High output torque, rotary center lower than similar products, greatly improving the rig drilling rig stability.
3, New variable angle mechanism to make the hole more convenient, adjustment range is larger, can reduce the requirements of the working surface.
4, For the customer's local special conditions, the cooling system is optimized to ensure that the hydraulic system when the outdoor temperature is 45 ° C, the maximum temperature does not exceed 70 ° C.
5, Match dedicated simultaneous casing drill tools (drill pipe, casing, eccentric bit, etc.), in the unstable formation with casing wall openings, the conventional button bit use for end-hole . High drilling efficiency , and good quality.
6, Machine is mainly suitable for deep foundation pit anchor support, but also through the rotary spray module replacement, so machine can be rotary jet spray construction.
Pipe End Forming Machine with Three Servo Motor (TEF508CPV)
**TEF508CPV Automatic Tube End Finish Machine**
**Description:**
The TEF508CPV is an advanced automatic tube end finish machine designed for deburring, flaring, and beading of metal round tubes. It offers a complete solution for preparing the ends of tubes with precision and efficiency. The machine can perform multiple operations—such as chamfering, squaring, and deburring—simultaneously, reducing the need for multiple setups.
**Model:**
TEF508CPV
**Application:**
This machine is ideal for processing the inside and outside ends of metal tubes, including stainless steel, aluminum alloys, and titanium. It is widely used in industries such as automotive, HVAC, and manufacturing where high-quality tube ends are essential.
**Introduce:**
Equipped with three servo motors, the TEF508CPV ensures precise control over the rotation, forward, and tube positioning axes. With digital control, it allows for accurate and repeatable operations. The machine is easy to operate and requires minimal manual intervention, making it suitable for both small and large production runs.
**Main Specifications:**
- Dimensions: 580 x 820 x 1200 mm
- Weight: 350 kg
- Power Supply: 380V ±10%, 50Hz/60Hz, three-phase
- Power: 4.5 kW
- Air Pressure: 0.4–0.8 MPa
- Clamping Mode: Pneumatic
- Clamping Force: ≥10 kN
- Rotation Axis: Servo Motor, 2.0 kW
- Forward Axis: Servo Motor, 2.0 kW
- Tube Position Axis: Servo Motor, 0.2 kW
- Coaxial Accuracy: ≤0.02 mm
- Forward Axis Positioning Accuracy: ≤0.01 mm
- Rotation Axis Deflection: ≤0.01 mm
- Control Mode: Digital Control
**Control Variables:**
- Clamp opening and closing
- Rotation axis direction and speed
- Forward axis origin, feed position, limit position, and speed
- Position axis origin, feed position, and speed
- Positioner plate opening and closing
**Capacity:**
- Tube OD for Chamfer/Squaring/Deburring: Φ6–50 mm
- Tube Wall Thickness for Chamfer/Squaring/Deburring: ≤10 mm
- Tube OD for Flaring: Φ3–50 mm
- Tube Wall Thickness for Flaring: Stainless Steel (0.4–1 mm), Aluminum Alloy (0.5–1.5 mm)
- Flaring Method: Eccentric Inner Diameter Rotary Swage
- Tube OD for Beading: Φ6–45 mm
- Tube Wall Thickness for Beading: Stainless Steel (≤0.5 mm), Aluminum Alloy (≤1 mm)
- Beading Method: Inner Diameter Rotary Swage
- Minimum Tube Clamp Length: 10 mm (varies by material and wall thickness)
- Tube Material: All types of titanium alloys, stainless steel, and aluminum alloy
**Features:**
1. One clamping operation can complete squaring, deburring, and chamfering simultaneously.
2. Quick die change allows for efficient flaring and beading.
3. Pneumatic clamping with buffer prevents damage to the tube.
4. Thin clamps and dies allow for processing of very short tubes (minimum 10 mm).
5. Forward axis controlled digitally for high accuracy and safety.
6. Rotation axis controlled digitally with variable speed for different materials.
7. Tube position axis ensures consistent length and repeatability.
8. Automatic operation with foot switch for start, feed, and reset.
9. Eccentric flaring center supports various sizes and wall thicknesses.
10. Dies for chamfer/deburring/squaring can also be used for flaring, reducing tooling requirements.
**Main Components:**
- Top spindle with excellent opening, ideal for complex bent tubes.
- Servo motor control for precise spindle movement.
- Front-mounted clamp capable of holding tubes as short as 10 mm.
- Clever chip groove design for smooth dust removal into the waste box.
- Automatic tube feed stopper that rises when the spindle moves.
- Organic glass protective cover and waste box for safety and waste collection.
**Tooling Options:**
1. **Flaring Center:** An eccentric shaft that enables versatile flaring for various tube sizes and wall thicknesses.
2. **Flaring Dies:** Compatible with chamfer/deburring/squaring tools, reducing die changes.
3. **Squaring/Deburring Head:** Adjustable blade positions for different tube dimensions and wall thicknesses.
4. **Beading Head:** Works with beading tips or arbor to process tubes as small as 6 mm.
The TEF508CPV is a highly versatile and reliable machine that delivers high-quality results with minimal effort. Its advanced features and user-friendly design make it an excellent choice for manufacturers looking to improve productivity and reduce downtime.