brass boiler drain valve for Irrigation System Brass Boiler,Brass Sillcock,Plumbing Brass Sillcock,Brass Boiler Ball Valve,Brass Boiler Valve,Boiler Valve NINGBO YINZHOU PLUMBING HARDWARE CO.,LTD , https://www.brassvalve-china.com
Not only beautiful pictures, this is a true 3D model. During the life cycle of any project, many people will discuss the project during the project and need to use CAD model data to measure the model. Therefore, ideally, it is best that each and every project-related person has a set of CAD systems selected by the company. However, in actual work, the company does not have such a large financial resources to purchase and maintain so many sets of software. Even with such great financial resources, not everyone in the project is an expert in CAD. In addition, if everyone can adjust and change the design, then management design becomes a problem. Delcam PowerSHAPE-e came into being.
Delcam PowerSHAPE-e allows each member of the project to view and modify the product design and make their own comments on the corresponding design and modifications. However, changes to the product design can only be stored on the local disk. They cannot change the original model of the product without authorization. They can then submit the modified or submitted model to the product designer, and the designer will decide whether to adopt the corresponding amendment.
This software is especially suitable for those who do not use the CAD system frequently, such as sales staff who need to discuss the progress of the project with the user frequently and market researchers who need to feedback new product design information from potential users. The user can view and verify a variety of design versions of different appearances or functions. Once the modifications are accepted, the designer can immediately generate any new, modified model design.
At the same time, the project participants involved in manufacturing can make suggestions on the product's processability according to the situation of the workshop equipment and the technical level of the staff. For example, a processing engineer in a plastic mold production company looks at the model and then proposes that the draft angle of the part needs to be increased to facilitate the removal of the part; or it is required to increase the round chamfer radius to improve the fluidity of the plastic in the mold. For this purpose, they can make corresponding modifications to the model on their computers and note the reasons for the change. Later, they submit the revised model to the designer, who will make the final confirmation and modification.
Delcam PowerSHAPE-e contains many easy-to-use surface modeling and solid modeling tools that make it easy to modify the input model. It is fully integrated with Delcam's data conversion software, Delcam Exchange. It can read model data files of all major CAD systems including CATIA, UG, Pro/Engineer, IDEAS, SolidWorks, Autodesk Inventor and Solid Edge. Read standard CAD model data such as IGES and STEP. The software does not enter the historical operating record of the CAD file, so it does not cause unexpected changes to other parts of the model by changing a part of the model.
With the globalization of manufacturing, maintaining good communication with different departments and supply chains is an urgent issue for everyone. Delcam PowerSHAPE-e will accelerate and simplify the exchange and feedback process of new design ideas. Because the designer can fully control any changes to the design, Delcam PowerSHAPE-e will make it easy and easy to manage various changes to the design from the initial concept design to the final product design process.
Delcam PowerSHAPE-e will also make new product development more successful and effective. Closer communication and communication with potential customers makes new designs more easily accepted by users. At the same time, information on process feasibility is fed back from the manufacturing staff as early as possible in the project development process, so that the designed product can truly meet the processing equipment requirements and processing economic requirements.
Material: C37700, MS58(CuZn40Pb2), CuZn39Pb3, CW602N, low lead brass
Thread end: NPT, BSP, BSPT
125 WOG
Size: 1/2''-3/4''
Easy to use free CAD software Delcam PowerSHAPE-e
Delcam PowerSHAPE–e is free CAD software that can be used by even non-professional CAD personnel. With Delcam PowerSHAPE–e, any person in the project can easily view, modify CAD model data and make corresponding amendments during project development. Users can download this free software.