One of the powers of the C-type hydraulic press is hydraulic oil, which we all know better. It is also well-known that the same people will have a lot of influence on the type C hydraulic press. So how can we avoid our C-type hydraulic press being contaminated by oil? Others Water Sports Accessories Others Water Sports Accessories,Paddle Board Accessories,Inflatable Paddle Board Accessories,Paddle Board Fishing Accessories Suzhou Sikor Industry Co., Ltd. , https://www.sikor-group.com
First, for hydraulic components, whether they are for maintenance or replacement of new parts, and the pipes must be cleaned before installation, the castings must undergo thorough cleaning, including the use of mechanical cleaning and chemical cleaning such as sandblasting. Wash in trichloroethylene, then blow dry with compressed air.
Second, when the hydraulic system completes the final assembly, it must also perform an empty-cycle flushing. At this time, other components of the system should be disconnected as much as possible to prevent contamination by dirt removed by the pipeline.
Third, the hydraulic components must be washed with kerosene before assembly, and it is forbidden to wipe them with fabrics with fibers.
Fourth, the fuel tank should be reasonably sealed and an air filter should be installed in the atmosphere. All seals must be reliable and non-oil resistant seals and hoses must not be used.
Fifth, the rational use of oil filter types should be considered in terms of oil filtration efficiency, ability to block dirt, allowable working pressure, and ease of contamination elimination.
Sixth, regular replacement of oil, the summer hydraulic system should use No. 32, No. 46 oil, the use of No. 68 oil in winter, when adding a new hydraulic oil to be filtered in advance, to be purified. When filtering, only insoluble suspended impurities can be removed, and soluble impurities cannot be filtered out. Only the regular oil change can be used to limit the content.
Seventh, in addition, even if the oil is sealed and filtered well, it will gradually deteriorate and lose its proper performance under the repeated action of long-term pressure and temperature, and it needs to be replaced regularly.