Product Characteristics:
1.Non oxygen seepage,and alage growing prevented
2.Small coefficient of dilatation and no deformation when surface mounted
3.High rigidity,high tenacity and resisitance to high temperature
4.UV resistance to prevent material aging
5.Heat preservation and energy saving,higher economical efficiency
6.Firm connection,no leakage and convenient installation
Hot selling PPR pipes and fittings,good Quality PPR pipes and fittings,Economy type pipes and fittings HEBEI CHENGDA HUAMO TECHNOLOGY CO.,LTD , http://www.chengdapipe.com
Components of a constant temperature and humidity test chamber compressor
The constant temperature and humidity test chamber refrigeration compressor adopts the French original "Taikang" fully enclosed compressor; the Taikang compressor is a piston type, and the piston compressor is a very familiar compressor. It has a long history, mature technology and a large range of cooling capacity. It is around 2.2kW to 200kW. The piston is used to drive the piston to compress the refrigerant through the crankshaft connecting rod.
The constant temperature and humidity test chamber compressor is composed of power, machinery, lubrication, cooling, control and other parts.
The power part is of course driven by the main engine, either electric or steam powered or otherwise.
The mechanical part is the main unit of the compressor, including the transmission part, the compression part and the housing part, and the entire compression work is done here.
The lubrication part is the key part of the compressor main body and the power part. Lubrication can reduce equipment loss and power consumption, which plays a key role in energy saving and work efficiency.
The cooling section is usually a cooling medium that is compressed (it can also include cooling the main unit and other parts, because it also cools down when the equipment is lubricated), reducing the temperature of the compressed medium and reducing the energy consumption during compression.
The control part is the brain of the compressor, including the electrical and instrument parts. Through the instrument feedback data, after the operator or electrical analysis, and then the electrical part to control the compressor work, to achieve the best working conditions.