Research Progress of Fiber Bragg Grating Sensors in

Optical fiber sensing technology based on Bragg gratings has received extensive attention and research by scientists since the 1990s. Although large-scale, fast and cheap grating production technology and its technology are mature, more expensive optical demodulation devices still limit its extensive application in a series of important fields such as industrial, chemical and building structure inspection. In addition, compared with the traditional optical domain demodulation method, the optical filter is used to convert the drift of the grating wavelength into the change of the power. The demodulation method has some advantages such as low cost, simplicity and fast response. However, the detection method of the traditional linear edge filter has been limited by the disadvantage of the smaller demodulation wavelength range (1-20 nm), making it difficult to apply it in distributed sensing.

In response to the above questions, the research group led by Associate Professor Xia Li of Wuhan Optoelectronics National Laboratory, School of Optics and Electronic Information, designed a demodulation method based on cross-gaussian filter (Figure 1). In the demodulation side, two Gaussian eigen filters with a certain center misalignment are used to make the power response curves of both ends have the same dislocation Gaussian features. Using power-difference detection, it is just a matter of converting a linear Bragg wavelength to power difference (Figure 2). And, the slope of their linear relationship can be easily adjusted by controlling the size of the misalignment between the filters. Because this method does not rely on the linear area of ​​the filter for linear measurements as traditional methods do, it has the potential to be of great advantage in the wavelength range of a demodulatable Bragg grating. Depending on the current state of the art in which Gaussian filters are made, a wavelength range of several hundreds or even thousands of nanometers of the demodulator can be achieved. In addition, this method has very flexible and adjustable sensitivity and measuring range, so it has good adaptability to different measurement application requirements. It can be predicted that this method has a very good application prospect in the field of Bragg grating sensing.

The research result "Wavelength interrogation fiber Braggingrating sensors on crossed optical microscopes" was published on Optics Letters (Vol. 40, Iss. 8, pp. 1760-1763) on April 15,

This work was supported by the 863 Project "Convergence and Innovation Demonstration Network Based on Telecommunication Network" (Project No. 2011AA01A110) and the Independent Innovation Research Fund of Huazhong University of Science and Technology (2014TS042).


Figure 1: Cross-Gaussian filter demodulation Bragg grating structure diagram


Figure 2: (a): The power of both ends of the grating with Bragg grating wavelength curve. (B): The result of subtracting the power curve at both ends

Mechanical seal: apply for the place require non-leakage environment.


Centrifugal Slurry Pump impeller: 

Centrifugal Slurry Pump Impeller is the wearing parts, according to different application use different type Slurry Pump impeller can enhance the efficienciesefficiency of slurry pump. Our impeller can be the impeller. Our XXX series slurry pump are equivalent to AH series pumps Warman slurry pump, our impeller and other wearing parts can be the parts of Warman Slurry Pump Impeller .

 

K type impeller- Closed Non-clogging impeller. For clear water, lime slurry, the sewage and fluids containing solids and sludge which do not liberate gas. 


N type impeller- closed multi-vane impeller. For clear water, the fluid containing slight suspension such as treated sewage, screen water,

 

O type impeller-Open impeller. Same application as [N" impeller but including fluids which contains air.

 

F type impeller Free flow impeller. For fluids containing coarse solids liable to bunch or plait (such as long fibue admixtures, sticky particles and so on) and fluids containing air.

Pump Parts

Pump Parts,Slurry Pump Impeller Material,Slurry Pump Sheath,Centrifugal Pump Impeller

Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd , http://www.bkdrtech.com