Continuous sealing machine is the sealing machine commonly used in our daily life. In addition to using continuous sealing machine in our daily life, we should pay more attention to the maintenance and maintenance of continuous sealing machine. We must know that even if you are a better tool, you do not know how to maintain it. Maintenance, long time, its function and life will be slowly aging, continuous sealing machine is the same, it should be the attention of all users of continuous sealing machine, so in order to better extend the life of continuous sealing machine, continuous sealing machine In the use of the process should pay attention to the following aspects of maintenance: About Cleaning Cases When the surface of the continuous sealer casing is stained or dusty, wipe it with a wrung damp cloth. Do not use liquid or spray cleaners to prevent corrosion on the surface of the casing and corrosion of mechanical devices in the inflow machine. Continuous sealing machine picture The above is the daily maintenance and maintenance of the continuous sealing machine, which is made by the continuous sealer small series, and hopes to help you.
93% Purity Medical Oxygen Generator is the Oxygen Generator manufactured for hospitals, clinics,etc.These places were normally
supplied with cylinder oxygen. But for some area, cylinder oxygen is
expensive and difficult to transport. This 93% purity Medical Oxygen Generator
is able to fill cylinders at site. Some customer use the 93% purity oxygen directly to hospital centralized oxygen supply system. The whole product has air
compressor, air treatment part, air tank, oxygen separator and oxygen
buffer tank. It is easy to install, easy to operate, fast to produce
quolified oxygen.
93% Purity Medical Oxygen Generator 93% Purity Medical Oxygen Generator,Medical Oxygen Generators For Hospital,Purity 93% Psa Medical Oxygen Generator Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagas.com
About Continuous Sealer Cleaning Always keep the continuous sealer clean to prevent water, dust, corrosive gas, etc. from invading the machine so as not to affect the normal operation of the continuous sealer.
About the vibration of the continuous sealer Place the unit in a stable place to prevent it from colliding, scratching, or falling.
For the test environment, use it at the specified ambient temperature (10°C to 40°C) and relative humidity of 80% or less, and there should be no vibration or other interference sources affecting the test results. Failure to do so may result in test results that do not meet the required level of accuracy or instrument failure.
The continuous sealing machine that stores and packs into boxes shall be stored in a ventilated, dry, non-corrosive place. The stacking height shall not exceed ten layers. The storage temperature shall be (-20~+50)°C and the relative humidity shall not exceed 90%. 
