TPU film coextrusion production line configuration

Introduction: In recent years, TPU film has been widely used in various industries due to its good toughness and aging resistance, and has developed into a mature environmental protection material. As a result, the TPU film/film coextrusion line has also been rapidly developed.

TPU film coextrusion production line configuration

In recent years, TPU film has been widely used in various industries because of its good toughness and aging resistance, and it has developed into a mature and environmentally friendly material. As a result, the TPU film/film coextrusion line has also been rapidly developed.

TPU film / film coextrusion production line specific configuration:

1, the device production TPU width is 1500 mm, thickness is 0.02-2.0 mm, using two twin-screw extruder co-extruded, each extruder is divided into 10 temperature control area precise temperature control.

2, the maximum output up to 700KG / H, do A / B / A or A / B distribution mode. Can meet the upper and lower two layers of film coating at the same time.

3, using PLC overall control, only one person can easily control, easy removal and replacement of key components, humanity, set aside remote control ports, can be synchronized monitoring in different places in the world.

Wire Cage Welding and Forming Machine

The Spun Pile cage forming welding machine is a fully automatic professional equipment for producing reinforced steel cage of concrete spun piles. The welding strength of the whole equipment is small, the forming is fast, the structure is reasonable, the maintenance is simple. Combined with modern frequency conversion control and man-machine interface, it is effective to ensure the stable and reliable quality of the steel cage.

PC wire cage welding machine

The technical parameters:

No.

Item

Specification

1

cage welding dia.

ø300 .ø400. ø500. ø600

2

length of cage welding

7M-15M(special cases is extended to 45M)

3

The number of longitudinal reinforcement bar

6.7.10 or 7.10.12.14 etc.(according to user's requirement)

4

Longitudinal reinforcement bar diameter

ø7.1.ø9.0.ø10.7

5

Ring reinforcement diameter

ø4- ø6

 

6

The cage body pitch

0-100mm

 

7

Pulling speed

MAX7500mm/min

8

Driving Power

8.4KW

 

9

Welding power

300KVA

10

Rotational speed of main engine

0-64r/min

11

Welding manner

ERW(electric resistance welding)

 

12

Control manner

Automatic control

 

No.

Item

Technical specification

13

Welding material

Any steel with a carbon content of less than 0.20%

14

Loss of solder strength

≤5%

15

Tension or shear at the solder joints

≥200KG

16

Welding transformer cooling mode

wind cooling,self-cooling

17

welder power supply

380V±5%  50HZ

18

environment temprature

-5℃--+35℃

19

 Relative humidity

<85%

20

welder weight

≈5T


Cage Welding And Forming Machine

Steel Wire Straightening Machine,Cage Welding And Forming Machine,Steel Bar Cage Forming Machine,Cage Mesh Welding Forming Machine

Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com