Found on Commandfireapparatus.com: A 2000 E-One 1500 / 500 pumper, equipped with a Cyclone II chassis featuring a flat roof cab. It's powered by a Cummins ISM 350 hp diesel engine and paired with an Allison automatic transmission. The unit includes an extended front bumper and a Hale QSMG 1500-gpm single-stage pump. The control panel is mounted on the side, and it comes with two pre-connected 1.75" crosslays. The truck has a 500-gallon poly water tank, an E-One extruded aluminum body, and four large compartments on each side with hinged doors. There's also a large rear step compartment and four SCBA bottle storage areas in the rear fender panels. A spacious compartment is located ahead of the pump panels, and it features an overhead ladder rack with two aluminum ground ladders. Additionally, there are four pike pole tubes, a Federal Q2B siren, warning lights, air horns, and a rear traffic directing light. Two telescopic scene lights are mounted on the back of the cab, and chevrons are visible on the rear step compartment doors. The GVWR is 42,700 lbs, with 12,169 engine hours and 89,544 miles on the odometer. Price: $29,000.00. Command Fire Apparatus photo Command Fire Apparatus photo Thanks, Ron — great find! This looks like a solid, well-maintained unit that could still serve a department well. If you're in the market for a used pumper, this might be worth checking out. Let me know if you need more details or have any questions about it. Dyeing Auxiliaries For Polyester In textile dyeing, it is hoped that the dyes can be evenly dyed on the fabric, without uneven depth and color spots, and has a good covering ability for the difference of affinity caused by the quality of the fiber. For this reason, the general selection of appropriate levelling agent is important. Polyester is one of the three major synthetic fibers with the fastest developing speed. It has good wear-ability and is the main fabric used for outerwear. When polyester and its blended fabrics are dyed with disperse dyes at high temperature and high pressure, the temperature rise rate will be improperly controlled due to the poor dispersion and evenness of the dyes. Therefore, effective levelling agent must be added when dyeing. Because the dyeing temperature of polyester fabric is generally around 130℃, that means this kind of dyeing agent is used to called high temperature leveling agent. superfine denier polyester fabric, high temperature, high pressure, recycled water, high concentration electrolyte conditions Dymatic Chemicals, Inc. , https://www.dymachem.com